Feature
●Suzuki Suzuki Suzuki Jimney JIMNY Tie Rod End Left and Right Set
●Compatible models: SUZUKI Jimney (JA12C, JA12V, JA12W, JA22W, JB32W), Vehicle Number: 150001 and later Jimney (JB23W, JB33W, JB43W)
●Reference genuine model numbers: Right: 48820-81A01, 48820-81A00, 48820-80002, Left: 48810-81A01, 48810-81A00, 48810-60A0 *This product is not an official product
●The tie rod end transmits the power of the steering wheel to the tire and absorbs shock and vibration caused by changes in the road, and is an important car part to maintain the stability of the car operation. The tie rod end boots are also attached to protect the moving parts of the tire side of the tie rod from friction, preventing grease and foreign objects from deteriorating or breaking the boot, causing the shaft to rattle when foreign objects or water enter the inside and the shaft may cause unusual vibrations to occur. Leaving the symptoms as it may promote deterioration of the car and other parts. The tie rod end boots are also inspected for vehicle inspection, so we recommend that you change them as soon as maintenance or prevention before an accident occurs
●Note: Installation support is not included. ·In any case, we cannot accept any warranty other than the product costs such as installation rents. ·We cannot address the compatibility of the specific vehicle listed in the description. Please refer to the description contents to determine the reference. We will ship in simple packaging in order to protect the environment and provide it at a low cost. Even if the grade or model is listed on the car model, it may not fit depending on the year and specifications, so please make sure to check the genuine model number attached to the actual car before ordering. This part requires special tools and knowledge to be replaced. Alignment and various adjustments are required after replacement, so if you do not replace it by a qualified person at a well-equipped mechanic factory, there is a possibility that it may cause serious accidents, so please confirm before placing your order. Compatible models are for reference only. Installation may not be possible depending on the vehicle. Even though it matches the compatible model, it may not fit depending on the model, model, model, year, etc. Product processing may be required even if it is designed specifically for you. Since it is not basically waterproof, please take a waterproof treatment before installing to prevent leakage. Please make sure to temporarily match your current car before installation, painting, or processing. Processing and separate parts may be required to match the vehicle and installation method. This is an imported product, so it is not as good as the genuine product. Depending on the vehicle installed, all features may not be available
●Note (Disclaimer) > Please Read Please Read We will not be responsible for any damage or indirectly caused by any type of legal claim due to damage or damage caused by our product itself or use of the product (including loss, business interruption, loss of business information) (including other financial damages)
Description
Suzuki Suzuki Jimney JIMNY Tie Rod End Left and Right Set
What is a tie rod end?
This is an important car part to transmit the power of the steering wheel to the tire and absorb shock and vibration caused by road changes, and maintain the stability of the car operation.
When it gets aged...
Tie rod end boots are attached to protect the moving parts of the tire side of the tie rod from friction, preventing grease and foreign objects from deterioration or breakage of the boot, causing the shaft rattling due to foreign objects and water entering the inside, and causing the jader shimmy phenomenon, which is an abnormal vibration while the handle vibration.Leaving the symptoms intact may promote deterioration of the car and other parts.
Reference genuine product number
Right: 48820-81A01 48820-81A00 48820-80002
Left: 48810-81A01 48810-81A00 48810-60A00
This product is not an official product.
Compatible models are for reference only.Installation may not be possible depending on the vehicle.
Even though it matches the compatible model, it may not fit depending on the model, model, model, year, etc.
Product processing may be required even if it is designed specifically for you.
Since it is not basically waterproof, please take a waterproof treatment before installing to prevent leakage.
Compatible models, etc.
Compatible models:
SUZUKI Jimney (JA12C JA12V JA12W JA22W JB32W)
Vehicle Number:
150001-up Jimney (JB23W JB33W JB43W)