Feature

●Smart ATO System: Taiwan brand AUTOAQUA, smart version dual sensing auto water compressing machine, complex design, full electronic structure, no mechanical parts, all components are included, plug and play
●Quick Insurance Control Technology: QST technology detects any abnormalities in the sensor or controller, detects the lack of water and overflow, preventing overfilling and pumping empty combustion
●Dual Sensing Light Probe: Small, lightweight, dual sensing probe is only 0.8 inch (2 cm) in size, suitable for large and small water tanks. Corrosion resistant, can be used with light saltwater
●Magnetic Design: You can adjust the water level to suit the amount you need to use, and it is very convenient to install and use, and the maximum installation thickness is 5.0 inches (12.7 cm). WARNING: Be careful of damage caused by strong magnets
●(LED Flashing Reminder Light) Intelligently detects anomalities of infrared probe and works in dark environments, providing excellent performance. Standard version (SATO-260P) has two color indicator lights in blue and red


Description

"Installation Notes: 1.Attach the magnet attached to the dual sensing probe to the normal water level of the sample or main tank, align the horizontal surface with the lower probe. 2. Connect one end of the water pipe to the DCDC water supply pump, insert the broken siphon tube into the other end. The position of the broken siphon tube is higher than the level of the reservoir and should be fixed as follows: Water Pipe Bracket 3.Connect the DC water pump and DC transformer to the controller. Please do not install the dual sensing probe in a bubble area to prevent interference and incorrect judgment. WARNING: Be careful of damage caused by strong magnets. Broken siphon pipes must be higher than the water level of the reservoir. Intake Inlet: When the refillable pump starts, air will enter the siphon breaker and block the siphon phenomenon. Drip Port: Water supply pump is normal. LED Indicator Number: (SATO-260P) Red and Blue flashing interwoven to indicate power on Blue light is fixed and standby status Blue light flashes to indicate the supplement/water pump is starting Blue light flashes quickly in a short time, and the sensor probe at the top detects changes in water level Red flashing, QST alarm, and bubble interference. Clean the probe and move the sensor to a bubble-free area. Flashing red, QST alarm, and running out of water in the reservoir. Add water to the reservoir *Troubleshooting with the above solution and unplug the power and reinsert it. **On a small tank, the upper probe may flash blue light for a short time every time the water is refilled. This is normal and will not work. DC Water Pump: * Head: 250cm * Flow Rate: 280L/hour Package Includes: (SATO-260P) a)1 * Normal Version- Intelligent Dual Sensor Automatic Water Supply Controller Maximum Mounting Thickness: 12.7mm b)1 * Power Supply 100-2 40VAC c. 1 * ATODC Water Trap Motor - Head: 8.2 inches (250 cm) Flow: 280L / HR d)1 * ATO Water Pipe Mounting Bracket Applicable Maximum Cylinder Wall Thickness: 12.7mm e) 1 * Broken Siphon - Eliminates Siphon phenomenon f) 1 * Water Pipe - Inner Diameter: 6.5mm / Outer Diameter: 9.0mm Length: 2mm Length: 2mm 00cm(6.00cm) 5 ft.)