Using polarizing film:
We used a light adhesive in consideration that the polarizing film should be glued to the screen or other smooth surface and may need to be removed.We have tested and found that light glue is enough for normal use, but if you need to paste the polarized film firmly, it is recommended to follow the following steps:
Clean Surface: Before applying polarized film, the surface must be cleaned with dust and debris.You can use a soft cloth or clean tissue paper to wipe the surface lightly to make sure the surface is clean and free of dust.
Spread a small amount of distilled water: Use a spray bottle to lightly spread the surface with a small amount of distilled water.Avoid using too much water to avoid unnecessary moisture on the surface.
Stick the polarizing film: place the adhesive side of the polarized film on the surface.
Air bubbles removal: After applying the polarized film, use a flat and flexible tool (such as soft doctor, avoid scratching) to gently press from the center to the edge to help remove possible bubbles.When using the tool, please make it soft so that it does not put too much pressure.
The diagram steps allow the polarized film to be adhered to the screen or other smooth surface.