Feature

●The specifications of the lens cover are changed sequentially. (The LED unit does not change)
●More than 80 types of vehicle-specific designs can be expanded with a variety of optional parts
●Compatible models: Mazda CX-8 (KG) 《December 29 - November 2017 2017 30》
●Functionality and practicality surpasses the original. LED light that brightens a variety of scenes
●No special tools required <Buyer Limited> DIY footlight that allows you to work while watching installation videos for each car model
●The LED lights can be turned on and off by connecting the door (interlocking with the room lamp)
●The illumination can be adjusted at night with 4 levels of brightness (100%), 30%, 10%, and 3%


Description

Note: Please read before purchasing.
Cars with dealer options and external products that have interior lighting functions such as rear seat monitors and room lamps with air purifier.
Since it may not work properly, it cannot be installed properly.
It is not compatible with cars with genuine LED interior lamps.
When using other than the LEDs in this kit, please be careful of the power that you can use.
Vehicle equipped with idling stop function is activated, and the LED may flicker when the engine is on, but it is not damaged to the unit.
Cannot be installed on vehicles equipped with i-ACTIVSENSE.
The i-stop function may not be able to temporarily operate after installation work.

Product Features:
The footlight will turn on and off in conjunction with the door opening and closing. (You can choose the on-off function for your device to turn it on and off. )
The foot light will light up in conjunction with the start of the engine.
Comes with 2 levels (100%/30%) brightness settings.
The foot light will light up when connected with the small lamp on.
Includes 4 brightness settings (100%, 30%, 10%, 3%)
Event Mode
Equipped with 2 patterns (slow flashing, fast flashing).
Battery load reduction function (auto off).
When the door is opened for more than 10 minutes, it will automatically turn off to reduce the burden on the battery.
Will not work during event mode
Event mode automatically changes to normal mode after up to 1 hour of continuous use.

Kit Contents:
LED control unit x 1
Unit specific harness x 1
Double-sided tape x 1
Dedicated 3-row flat LEDs x 4.
Extension harness x 2
LED fixing bracket x 4.
Fuse power supply x 2
Harness with connector x 2
Panel removal x 1
1 x Wiring Guide
Wire band x 6

Product Specifications:
■ LED Control Unit
For use with DC 12 V cars.
Output current: less than 2A
■ Dedicated 3-row flat LED
For use with DC 12 V cars.
Current consumption: 60 mA/pc
Cord: 0.2 sq equivalent - length 3.3 ft (1 m)
■Dedicated harness
Black/white, black (fine wire): equivalent to 0.2 sq - length 19.7 inches (50 cm)
Yellow: Equivalent to 0.5 sq - Length 19.7 inches (50 cm)
Red: equivalent to 0.5 sq - length 19.7 inches (50 cm)
Black: Equivalent to 0.5 sq - Length 3.3 ft (1 m)
Blue: Equivalent to 0.5 sq - Length 19.7 inches (50 cm)
Orange: Equivalent to 0.5 sq - Length 19.7 inches (50 cm)