Feature●Uses: Tap holders for iron plates, non-ferrous metals, resin, etc. For through holes●Beveled cutter, 0.4 inch (9 mm) with center punch●Hexagonal shaft, electric, and manual use●Tap processing material thickness and allowable rotations: Screw diameter M3/pitch 0.5/punch hole drill 2.5 mm/processing material thickness less than 0.1 inch (3 mm) / Rotation speed (ironwork) (non-ferrous metal/resin) 1000/1500 rpm●Tap processing material thickness and allowable rotations: Screw diameter M4/pitch 0.7/drill hole 3.3mm/processing material thickness 0.04 inch (4 mm) or less / Rotation speed (ironworking), (non-ferrous metal/resin) 800/1200/min●Tap processing material thickness and allowable rotations: Screw diameter M5/pitch 0.8/drill hole 0.2/thickness 0.2 inches (5 mm) or less / Rotation speed (ironworking), (non-ferrous metal/resin) 600/900 rpm●Tap processing material thickness and allowable rotations: Screw diameter M6/pitch 1.0/drill hole 0.2 inches (5.1 mm) / Processing material thickness 0.2 inches (6 mm) or less / Rotation speed (ironwork) (non-ferrous metal/resin) 500/750 rpmDescription
For taping iron plates, non-ferrous metals, and plastic.
It is easy to eat, and you can tap it up with electric tools.