How to use
Using the GT-1 is very easy.
Connect the BNC plug on the RX display side to the receiver antenna input and the cable from the antenna to the BNC jack on the side shown as ANT.
If necessary, connect the converter adapter or receiver to the GT-1 with a short coaxial cable about 4.0 to 7.9 inches (10 to 20 cm).
The GT-1 is an insulated transformer that reduces the effect of noise by blocking the loop from the noise caused by ground loops.
It is not effective for noise caused by other than the ground loop or external noise that jump directly into the antenna.
If you use a laptop computer, you can expect a noise dampening effect with the GT-1 if you are using a battery.
Features: Insulation transformer
Frequency range: 40kHz - 30MHz
Insertion loss: up to 3 dB
Input and output impedance: 50Ω unbalanced
Connector shape: BNC-P (receiver end): BNC-J (antenna side)
External dimensions (excluding connector): 1.3 x 2.0 x 1.0 inches (34.5 x 50 x 25 mm)
Weight: Approx. 1.8 oz (50 g) GT-1 is for reception. Not for transmitting.