Feature
●★Heat Shrink Butt Connector: Double wall design, polyolefin tube outside and hot melt adhesive inside Use a heat gun to shape and properly waterproof
●★Application:Home Audio, Car Audio, Power Cable Repair, Electronics, Electronics, Garage, Shop, Automotive, Engine Repair
●★130 Heat Shrink Butt Connectors for Small Wire Splices and Solderless Applications, Tinned Copper Barrel with Double Wall Design for Precise Crimping and Good Contact
●★Size:Blue-length 37.3mm, outer diameter 5.67, inner diameter 2.4, maximum current 27A Red - Length 37.3mm, Outside Diameter 4.75, Inside Diameter 1.7, Max Current 19A Yellow - Length 42mm, Outer Diameter 6.93, Inner Diameter 3.6, Max Current 48A
●★All Butt Connectors are stored in a sealed plastic box for easy use and storage. Free box with buckle closure
Description
Thank you for choosing CESFONJER heat shrink butt connector.
More information about the CESFONJER Heat Shrink Butt Connector Set!
130 connectors are packed in a sealed plastic box for easy use and storage (60 Red, 40 Blue, 30 Yellow).This is a free box with a buckle.Waterproof heat shrink tubing has polyolefin exterior and hot melt inside to ensure a waterproof seal and prevent wire corrosionHeat shrinkage is 3:1.Transparent color allows you to easily check the wire location.Superior wire contact, copper barrel increases current flow, reduces voltage drop, prevents wiring failure, and reduces equipment downtime.For best results, use a heat air gun until it is small in size and the glue flows down and fills the gap in the terminal.Widely used in home audio, car audio, power cable repair, electronics, electronics, garage, shop, automotive, engine repair.
Installation Instruction
|
|
|
|
|
|---|---|---|---|
|
Prepare the terminals, remove the protective layer from the 5-10mm wire connections, then insert the line from both ends. |
Use pliers to hold the grooves to ensure the copper wire and wire are in close contact |
Start with the heat gun at the highest setting and slowly heat the shrinkage and focus until the solder melts. |
When the solder melts, turn off the heat gun and wait for the terminal to cool. |
Product Features
|
|
|
|
|
|---|---|---|---|
|
The product is small in size, light weight, easy to store and carry. Tinned copper barrel with double wall design for precise crimp and good contact Heat shrink rate 3:1, polyolefin tube on the outside, hot melt adhesive on the inside, and a heat gun for proper waterproofing.Provides a 360 degree safe seal. |
The inner wall of the heat shrink tube has enough hot melt adhesive to ensure waterproof performance reliability. |
Wide application in automotive, watercraft, electrical and electronic industries |
Translucent color makes it easy to test the position of wire, prevent wire corrosion and provide a waterproof seal. |
Size:
Blue-Length 37mm, Outside Diameter 5.7, Inside Diameter 2.2, Max Current 27A
Red-length 37mm, outer diameter 4.8, inner diameter 1.7, maximum current 19A
Yellow - Length 42mm, Outer Diameter 6.9, Inner Diameter 3.7, Max Current 48A
Product Details
CONVENIENT DESIGN: One plug and one pressure provide easy docking, one docking, long term peace of mind.
Lightweight Straight Design: You can count millimeters on both sides of the protruding part, and the overall trend is straight, allowing you to handle more narrow spaces.
Separate Middle Design: There is a separation in the middle of the terminal, the length of the copper wire that enters both ends is the same length.
Allows visual inspection, prevents corrosion and provides a waterproof seal
Package Includes:
130X Heat Shrink Butt Connectors
Note: Use Occupational Crimping Tool for best results
This item is measured by hand, there may be 1-5mm error