STEP1

Place the rear on the smallest gear side.

STEP2

Align the chain cutter with a round protruding pin and tighten the handle to push the pin out and cut the chain.

STEP3

If you want to assemble a new chain, you can adjust it to the largest gear in the front and back.

The length of the chain is the same as the one you used before.By matching the number of links, you can set the chain length as it was before replacing.

STEP4

Cut the excess chain in the same manner as the first time.

Simply stack the chain to align the holes and insert a new connecting pin.

STEP5

Place the shaft of the chain cutter on the pin and insert it from the top of the pin to the chain.

Angled top and bottom for easy insertion

STEP6

When you push the pin in, the top of the pin will come out from the other side as shown in the picture, so the protruding top is inserted into the hole of the chain cutter.

STEP7

Because the movement of the chain is poorly attached, you can squeeze the chain and use force it vertically and horizontally to make sure the movement is complete.