Feature(may vary by option.)

●Standard miter track with 30mm x 12.8mm sectional size
●You want to make it easy to use with a router table, table saw, or drill machine. This is a useful part for making such jigs
●Screw holes on bottom of groove
●Can be used in combination with T-slot nuts, miter slot runners, featherboards, etc
●Size: As shown in the picture; Weight: 10.2 oz (290 g)

[600MM]

Description


	30mm Standard Miter Truck	19mm small miter track	45mm scale miter track	45mm scale miter track	1.8 inch (45 mm) non-graduated miter track
Cross Section Size	30mm x 12.8mm	19mm x 9.5mm	45mm x 12.8mm	45mm x 12.8mm	45mm x 12.8mm
T-Slot Nut	✓	Used in conjunction with T-bolts	✓	✓	✓

1.2 in (30 mm) miter track specifications.

Miter Trucks 30mm Standard

Standard miter truck

Cross section size: 1.2 x 0.5 inches (30 x 12.8 mm)

You want to make it easy to use with a router table, table saw, or drill machine.

For use with featherboards

Can be used in combination with featherboards, etc.

This featherboard comes with a T-bolt and is also used for 19*9.5mm T trucks.

Used in conjunction with T-slot nuts (zippers)

It can be used with T-slot fasteners, miter slot runners, slide bars, etc.

It is also used for mater trucks with 1.8 inch (45 mm) standards.

For use with miter track hold down clamps

Can be used in conjunction with miter track hold down clamps, limitters and more.

It is also used for mater trucks with 1.8 inch (45 mm) standards.

We also carry hold down clamps with T-bolts, so please check before purchasing.

Standard Specifications

For use with featherboards

For use with T-slot nuts

19mm Small T-Track

Small T-Track

Cross section size: 0.7 x 0.4 inches (19 x 9.5

You want to make it easy to use with a router table, table saw, or drill machine.

For use with T-bolts

Can be used with T-bolts.

For use with miter track hold down clamps

T-Track Hold Down Clamps Can Be Used In Along With T-Bolts.

We also carry hold down clamps with T-bolts, so please check before purchasing.

For use with miter track hold down clamps

T-Track Hold Down Clamps Can Be Used In Along With T-Bolts.

45mm DIY Mitter Truck

Cross section size: 1.8 x 0.5 inches (45 x 12.8 mm)

You want to make it easy to use with a router table, table saw, or drill machine.

For use with memory limiters

Can be used with memory limiters (positioning) and more.

For use with miter track clamps

Can be secured with a dedicated miter track clamp.

For use with table saw fences

In addition to a table saw fence, it can be used in a variety of applications such as cutting board materials, cutting angles, and with a square torso.