This is a free-type two-wheel pulley. The opening is reproduced even to the pulley hole in the pulley.
Use with commercial-style topping lifts (reproduces the derrick post and delick poles close to the stow), the Delick Boom Guy (installed on the end of the boat from the delick pole to the end of the row).
It cannot be used with one wheel in a fixed position. (GK70202)
Includes: 1/700 Pulley II
Contents: 42 pieces.
Base Material: Resin
Regulations, etc. : RoHS compliant
Size: Pulley Φ=1.1mm, t=0.16mm (pulley), L=4.317 (rigging ends)
Size is based on the dimensions of the design phase, actual size may vary depending on the characteristics of the material and climate.
Platform size: W = 1.4 inches (35 mm), D = 0.6 inches (14
Product List: https://waterline.sakura.ne.jp/products_list/pdf
Use instant glue or epoxy glue for the adhesive.
Raised support for easy removal.
Use a design knife, etched saw or thin plastic nipper to cut off.
Remove burrs from forming and apply evenly with sandpaper if necessary.
Isopropyl alcohol prewashed so no degreasing.
Revision Correction
2023/05/18 Early Development Lot Test Shot, Detail Modification, Early Lot Production 2023/05/20 Support Material Correction (Rigging Support Installation)
2023/05/21 Supporting Material Modification (Improved Support Material)
2023/05/23 Resin Material Changes To Improve Vulnerability, Final Test Shot, Early Lot Production
Related Products
1/700 Pulley I GK70202
1/700 Hook I GK70203
1/700 Hook II GK70231