Features:
Drive current algorithms and regulations
Drive current algorithm: i = Vrefx1.9/2.5, default Vref: about 0.65v, hence the default current 0.5A, maximum current 1A
Vref measurement of intermediate voltage of Gnd and Potentiometer
3. Do not connect to motor when measuring voltage. Otherwise, the driver will burn easily.
4. Turn on voltage measurement Do not connect USB power supply.
Using the TMC2100 Drive Module
1. If you use it with Ramps1.4 or MKS Gen or Lerdge touch screen motherboard, please remove the 3 jumper caps under the socket.
Please pay attention to the direction.
3. Install the heatsink directly on the PCB
4. If the direction of the motor is opposite to A4988 and DRV8825 direction, please adjust firmware or adjust the motor wiring if you change to 4988. When using the Lerdge motherboard, please set the direction setting page directly to the motor.
General
Quantity: 1 set
Material: FR4
Size and Weight
Dimensions (6cm x 4.8cm x 1.5cm)
Weight (20 g)
Package includes:
1x TMC2100 V1.3 Step Stick Stepper Motor Driver
1x Heat Sink
1x Screwdriver