Feature

●PCB terminals are widely used in almost all electronic devices, especially circuit boards, PCB, prototypes etc. Acts as a connector between power supply and signal
●Insulation Voltage: AC300V, Rated Current: 12A3 Position, Suitable for 5mm Pitchboard and AWG 26-14 Wires. Package content: 10 PCB terminal blocks
●The terminal pins are made of brass tinned material with excellent conductivity. The sides of each PCB connector are manufactured with a splice slot suitable for adding positions. Besides, the simple structure makes it possible to take up small spaces and ease of use
●Insert the pin into the board, then connect it together. If you need a wiring, please remove the wires first, loosen the screws and remove the wiring hole, insert the wires into the hole, and finally tighten the screws to fix it firmly
●The wiring order must be confirmed beforehand. Otherwise, connection errors are very prone to occur


Description

What is this?

PCB terminals are widely used in almost all electronic devices, especially circuit boards, PCB, prototypes etc. Acts as a connector between power supply and signal.


What can you get?

PCB screw terminals are included. Size: Insulation Voltage: AC300V; Rated Current: 12A; For Wire Gauge: AWG 26-14; Position: 3; Pitch: 5mm; Wire Type: Lifting; Wire Contact Material: Steel Galvanized; Terminal Material: Brass Tinned; Shell Material: Plastic; Color: Green; Terminal Length: 4mm; Body Size (Terminals not included): 15 x 8.1 x 10.1 mm(L*W*H)

Package Content:
10 x PCB Screw Terminals


Do you have the advantage of the product?

GOOD MATERIAL - High conductivity brass tinned plating contacts terminal connectors with moderate thickness plastic construction for durability.
Spliceable - The sides of each PCB connector are manufactured with a suitable splice slot for added positioning.
EASY TO SECURE - Comes with lifting wiring holes and screws in place for easy wire holding


How do I use it?

Installation steps: 1.Insert the pin into the board and connect it together. 2. If you need a wiring, please peel off the wires first. 3.Next, unscrew the screws to release the wiring hole. 4. Insert the wire into the hole. 5.Finally, tighten the screws to fix it firmly.


Should you pay attention to something?

The wiring order must be confirmed beforehand. Otherwise, connection errors are very prone to occur.