[Compatibility]
This bracket allows the JB23 to attach a large capacity 8 bumper rubber to the rear of the JB23. Bumper Rubber + Brackets Left & Right Set
The bracket allows the JB23 to attach a large capacity 8 bumper rubber to the rear of the JB23. Left and Right Set Can also be installed on the rear of the JA22 or JA12.
It can also be installed with the standard 8 shaped bump. (Because the base is thin, it is recommended to be installed with spacers. )
The bumper rubber and bracket mounting bolts are supplied with button bolts to ensure a full bump and cut off when the bump and bolt is in contact with the bump and bolt.
Height 1.0 inch (25 mm) and long holes allow you to adjust the front and back position. You can also install it in a smooth direction.
Compared to a large capacity bumper rubber; the height is easy to adjust with spacers, and it is durable and resistant to cracking or bending.
Product Description:
Compared to the previous type 8 bumper rubber on the market, the hollow part is reduced and the thickness is 1.5 times and the capacity is about 2.4 times
As the thickness and capacity increases, the hollow portion is less likely to warp or warp and will ensure a tight hit of the hose.
The mounting part has a long hole so you can adjust the hitting position.
Dimensions (H x W x Thickness): 3.9 x 3.3 x 2.0 inches (100 x 84 x 50 mm). For reference, the height of the genuine bump is about 40mm in front, and the rear is about 50mm in height. The 8 shape bumps that are used in the traditional, have a height of 3.1 inches (80 mm).
Available in 3 types: Hard (70% hardness), soft (60% hardness) and super soft (50% hardness). If you want to keep it firmly in place, please choose super soft if you want to absorb soft shock.
For reference, the hardness of the traditional 8 bumper rubber is about 55. If you feel stiff when using JSTC, please cut or remove meat before using. [Precautions]
Please adjust the position when contracted, so as not to interfere with caliper or coil.
Instruction manual not included due to various types of vehicles and installation methods. Please contact us if you have any questions.
The frame is secured with a single bolt so that it can be freely installed, so please check if there is any loosening.
(NOTE) Please check the stock of the item before ordering. Due to the system circumstances, there may be cases where the item is in stock state. If the manufacturer is out of stock, we will contact you according to the manufacturer response. Please be aware that in case of a long term out of stock or discontinued product, we will deal with cancellation