[Type 10J3/CB] Fuel Fuel Cap Cover [ABS Resin/Carbon Look Glossy Finish] [Suzuki / New Jim NiSierra JB74W Jimny SIERRA Logo Mark Cutting Sticker Included / Customer Order Item] European Specifications / Braga

Compatible models:

[Suzuki / Jim Niesiera/JB74W, JB43W]

Even if the following vehicle models are compatible with some year, grade, and special specifications vehicles, the shape may not be able to be fitted with different models.Please make sure to check the following fitting examples and fitting sizes before making your purchase.

Gasoline cars (both Hioku and Regular usage) are also displayed as "GASOLENE" but can be attached to diesel cars (petroleum).

Note: When refueling the actual product, please be careful and make sure to refuel the suitable fuel for your car.

This product is only for genuine caps with a drop prevention cord on the side.Therefore, it cannot be attached to a cap that has a drop prevention cord on the top or a cap without a cord.

■ New Gym Knee Sierra

JB74W

■ Jim Knee Sierra

JB43W (7 type/8 type/9 type) *Includes a cord to prevent the falling on the side / Size Note:

■Other Suzuki vehicles *With a cord to prevent falling on the side/Size Note:

If the following product size matches the compatible size of your original oil vent cap and you can install it. )

- Highest quality "carbon style" water printing processing!

- Outstanding gloss specification! Surface has been finished with a clear top coat.

■This product is an outside product made overseas.

■ Easy to install! Strong double sided tape closure.

■ New Jimny SIERRA < Jimny SIERRA >> Comes with a cutting sticker (*Customer order/foreign product)

■ The unique texture and color of carbon tone water print is exceptional.

■ An everyday refueling cap that makes a statement!

■ Impact when opening the oil inlet!

Note:

·The logo sticker will be placed on this product as a customer-ordered item after placing your order.

·Each sticker on this product is cut with strong adhesive so it may peel off depending on aging and usage conditions.Please acknowledge

When refueling, please be careful not to expose gasoline or oil to the sticker.Also, please be careful not to touch the sticker when refueling work.It is especially easy to peel off if you touch the nail.

■ This product color/carbon tone glossy finish [CARBON]

Carbon water-based printThe surface is then polished with a clear top coat finish.

Note: Due to the printing process of carbon water conditioning, the reverse side of this product does not look like carbon.There may be some irregularly carbon tone printing.Please acknowledge

■ Product material: ABS resin

[Size of each item]

Please refer to the diagram for each size of this product refueling cap cover.

External Size: Approx. Diameter 2.8 inches (70 mm) x Height 1.0 inches (25 mm)

Inner Size: Approx. Diameter 2.6 inches (65 mm) x Height 0.9 inches (22 mm).

Interior of opening and closing knob: Width 2.6 x Height 0.9 x Height 0.8 inches (65 x 23 x 20 mm)

Note: The external size of your original oil cap can be installed on vehicles within each of the internal sizes of this product.Please make sure you do not mind before

[Compatible sizes with genuine oiler caps]

Please refer to the following [Jimnie Sierra Genuine Oil Refueling Cap Compatible Examples / Compatible Sizes]

External size: Approximately within diameter 2.6 inches (65 mm) x height 0.9 inches (22 mm)

Opening and closing knob size:

Approx. Width within 2.6 inches (65 mm) x Height within 0.9 inches (23 mm) (middle part within 19.5 mm) (height within 0.8 inches (20 mm)

Precautions for Installation Work

This product is an overseas imported product, so there may be some uneven treatments, small scratches, dirt, burrs, and protruding double-sided tape.Please acknowledge

This product is a generic item only.It does not cover all.Therefore, there may be slight gaps, etc. visible around the mounting part.Please acknowledge

Installation is done on a wide flat surface other than the road.

Be sure to stop the engine and turn on the handbrake before doing it.Then open the oil inlet door.

1. Please make sure to clean and degrease the surface of the original oil refueling cap before installation.

Remove gasoline, oil, dirt, etc.

2. Please make sure to pair this product with a genuine oil supply cap before installation.Then, close the oil outlet door once and check for opening and closing with the temporarily.

3. Then, peel off all the protective cover of the double-sided tape on the back of this product, and carefully stick it to the center part of the original oil cap as much as possible.

Please be careful not to touch the cutting sticker when applying this product.

Please be aware that if you install it in one side, it may come in contact with the oil inlet door.

Heat up the double-sided tape with a dryer and then paste it on to increase the adhesion.If the temperature is cold, please heat it before installation.Double-sided tape cannot be reapplied, so please take great care when applying this product.

4. After pasting, place a clean towel on the surface of the cover and press several more places from the right top.

Please do not use the sticker as it may come off if you slide it and press it.The adhesive time of the double-sided tape is usually 1 hour.Until then, please do not touch it as much as possible.It will take about 24 hours to fix.

5. Finally, close the oil inlet door and youre done.

Original accessory parts from Western-style shops. Made-to-order items!

Jimny SIERRA logo cutting sticker set.

Comes with various cutting sticker logos, etc.

Silver Logo Sticker!

Left open, gas station mark, lock:

! CAUTION / GASOLINE

High quality ABS resin body. The surface is printed with superior carbon water-based surfaces. Glossy finish!

Designed specifically for Suzuki / Jimney / Sierra cars. Outstanding fit. Easy to install with double-sided tape.

[Type 10J3/CB] Fuel Fuel Cap Cover [ABS Resin/Carbon Look Glossy Finish] [Suzuki / New Jim NiSierra JB74W Jimny SIERRA Logo Mark Cutting Sticker Included / Customer Order Item] European Specifications / Braga

This is a new Suzuki Jimney Sierra fuel fuel fuel cap cover from the original [Type 10J3/CB] from overseas shops.In addition, the new Jimny SIERRA logo cutting sticker set is a very fashionable and sporty exterior parts.

This product is made of high quality ABS resin, and the surface is printed with high quality water surface.

The parts that are not normally claim at all, are immediately largely and sparkle.

Why not use this new Jimmnie Sierra Fuel Fuel Cap Cover to custom your vehicle?

You will be able to enjoy the stylish and sporty car life.

[Precautions]

This product is an overseas imported product, so there may be some uneven treatments, small scratches, dirt, burrs, and protruding double-sided tape.Please acknowledge

This product comes with a cutting sticker and is not genuine Jimney Sierra.This is an original external part from overseas shops.Stickers will be custom set and shipped after your order.Thank you for your understanding.

Please be careful when handling the cutting sticker part after installation.This is a sticker only so please be careful not to directly touch the sticker or hang it from gasoline or oil, etc. when opening or closing the refueling or cleaning.It may peel off.

Cutting stickers may come off slightly depending on aging and usage conditions.Please acknowledge

Due to the printing process of carbon water conditioning, the reverse side of this product will not look like carbon.There may be some irregularly carbon tone printing.Please acknowledge

The color and texture of this product may differ slightly from the published image.Please acknowledge

This product is a generic item only.It does not cover all.Therefore, there may be slight gaps, etc. visible around the mounting part.Please acknowledge

If you remove this product after installation, the installation part may differ due to deterioration over time, depending on the number of days of installation.Please acknowledge