Feature(may vary by option.)

●Size: 6203RS (inner diameter = 17mm, outer diameter = 40mm, thickness = 12mm)
●Sealed on one side of the bearing for easy lubrication and maintenance and protected from dirt. Ideal for vertical installation
●Chrome steel long life bearing, smooth and low noise
●ABEC Resistant 1 (P0), Z2 Noise Level for Most Common Use
●Pre-lubricated and easy to maintain

[12mmx28mmx8mm]

[17mmx40mmx12mm]

[15mmx42mmx13.0mm]

[10mmx30mmx9mm]

[20mmx47mmx14mm]

[7mmx19mmx6mm]

Description

1. Deep groove ball bearings are one of the most widely used rolling bearings. These are used to handle radial and axial loads in both directions
Suitable for all kinds of industrial equipment, micro motor, small rotating motor, office equipment etc.
3. Low friction and high speed limit, deep groove ball bearings are cost effective and low maintenance
4. Chrome Steel (GCr15) is heat treated with high hardness and uniform, wear resistance, high contact fatigue performance.
5. Single shielding, pre-lubricating, normal precision.
Selection Guide:
Shield (Specified Sufix Z/ZZ) - High Speed Protect from dirt and debris.
Contactless Seal (named Suffix RZ / 2RZ) - Made of steel reinforced NBR (oil and liquid resistant) Provides a better sealing effect than a shield. Operates at the same speed as the shield.
Contact seal (specified tailgate RS / 2RS) - Made of steel reinforced NBR (oil and liquid resistant) Lower speed than sealed bearings
Specifications:
Model: 6203RS
Seal Type: Single Seal
Cage Material: Stamping Steel
Inner Diameter: 0.7 inches (17 mm).
Outer Diameter (D): 1.6 inches (40 mm)
Thickness (B): 0.5 inches (12 mm)
Dynamic load rating: 9.58 kN
Static Load Rating (Cor): 4.78 kN
Precision class: P0 (ABEC-1).
Noise Level: Z2
Pack Quantity: 2
Weight: 4.2 oz (127 g).