■ SPOON has developed and fitted STIFF PLATE FRONT to improve the grounding and maneuverability of the S660 front section, achieved high performance movement.
However, as we continue to develop the vehicle body, we have continued to pursue a higher level of maneuverability and development tests in order to improve the condition of being forced by the steering wheel.
The part that was the cause of this was the tightening part of the steering gear box.
Usually the steering gear box is tightened with 4 or more bolts on the subframe
However, the S660 is tied with only two bolts, and there is a rattle of the bolt holes in the fastening, so there was always a twist and minor modification is required.
We have increased the tightening part of the body and steering gear box, and aimed for a rigid structure that the body and gear box will accept for large inputs.
The plate is designed with a special press mold in the same way as the STIFF PLATE FRONT, and the 1.6mm thick JSC780 ultra high tenet material is molded with 800t hydraulic press.
In addition, the gap of the tightening bolt is made using the same principle as Rijikara to create a special color.
By increasing the tightening strength of the steering gear box itself, it is possible to achieve a direct and moisturized steering feel.
Installation is completely unprocessed.
■ Before purchase, please check the vehicle model, engine model, drive system, year, grade, etc. on the manufacturers website, and make sure to check whether it is compatible with your car.
For the above compatibility (car model, year, model), the model number of the compatible product may change due to model changes, etc. Please check the manufacturers website. Please note that the posted image is a sample, actual shape, color, and component components may vary slightly. ---