Feature

●This module is provided as a stepper drive signal. You also need a drive to control the stepping motor
●The controller has 3 kinds of frequency signals in total, high, medium and low, so you can choose the jumper
●Depending on the frequency of measurement, you can measure two ports of PUL and Common Cassode Terminal (GND)
●PUL+ and PUL-are positive and negative pulses EN+ and EN-enable positive and negative terminals. DIR + and DIR are positive and negative directions. These six lines are connected to drive the direction of the corresponding pulse
●Press the key to control forward and reverse motor You can control the speed of the motor by adjusting the frequency of the potentiometer


Description

Description:

It is a pulse module, which can provide a supply signal to the stepper driver at a frequency of 2.5 KHZ and 68 kHz.

If you want to control the stepping motor, you need to use a motor driver.

Change the frequency range to change the capacitance of C46

It can move, stop, move, and function as a controller by keys.

You can control the motor speed by adjusting the potentiometer.

Specifications:

Power Supply: DC 15-80V or DC 12V

High frequency: 5.8KHZ-127KHZ

Medium frequency: 590HZ-15.8KHZ

Low frequency: 82HZ-2.3KHZ

Measuring frequency interface: PUL, GND

Package Includes:

1 x Pulse Signal Generator

Note:

Except for other products, except the product itself.

Please allow slight size deviation due to manual measurement.

Please be reminded that due to lighting effects, monitors brightness / contrast settings etc, there could be some slight differences in the color tone of the pictures and the actual item. Please understand.