Feature
●Side Door Visor. Strong double sided tape and clasp for excellent durability and safety. Designed for a custom fit Dark gray smoke color while maintaining high permeability
●Sun Visor Product Includes: 2 front pieces (1 car), cotton degreasing, complete clasp, and installation instructions are also included
●Please feel free to contact us if you have any questions or concerns. In that case, please prepare the cabin number, model specified number, and sorter number for vehicle verification. We will check here
●Compatible models: [Daihatsu / DAIHATSU] Attley / ATRAI S700 Series
●Compatible years: From December 2017 to Reiwa 3 models: S700V / S710V / S700W / S710W
Description
Net Stage: Introducing the door visor.
This side visor is a sample installation image.
Smoke door visor designed specifically for the vehicle.Unlike other visors on the market, the metal fittings are included for the car and are double secured with double-sided tape. Instruction manual and cotton degreaser are included, so you can work as soon as it is delivered.
Net Stage: 3 points of the door visor.
Uses smoke colors. By securing the double W with metal fittings and tape, we pay attention to the durability of long-term outdoor use.The side visors are made of acrylic material for a car model!
[Net Stage] Introducing the easy installation instructions for the door visor.
|
|
|
|
|---|---|---|
STEP1 CleaningCarefully remove the dirt from the mounting part of the visor with the included degreasing cotton. |
STEP2: Remove the rubber.Pull slowly off the top part of the window rubber frame (ram channel). |
STEP3: Prepare double-sided tape.Peel off the blue protective tape from the double sided tape of the visor.The protective tape should be removed upwards so that it can be pulled during installation. |
|
|
|
|
|---|---|---|
STEP4: Remove protective cap.Comes with a protective seal or protective rubber cap, please remove each and attach the clasp! |
STEP5: Attaching fastenersBrackets may vary in shape between 2 front (front and back) and 2 rear positions. |
STEP6: Adhesive.Insert the visor fastener into the window frame and replace the rubber frame.Please be careful that the visor and body are parallel. |
|
|
|
|
|---|---|---|
STEP7: For temporary fastening to adhesive installation.Once the installation is done with the fastener, pull all the protective tape off and apply the double-sided tape to adhesive. |
STEP8: Complete with final fixation.The tape will adhere firmly when you slide it with a towel or the other while holding it down.No tools required and can be installed by a single person in about 30 minutes to 1 hour. |
No tools required. Instruction manual included.In addition to the side visor, the fasteners, cotton degreasing, and instruction manual are also included.(There may be cases where the front is only used in some vehicles such as light truckers. ) |
|
|
|
|
|
|---|---|---|---|---|
| Daihatsu Attley 700 Series Visor S700V / S710V / S700W / S710W Side Visor Door Visor | Daihatsu High Jet Cargo Visor 700 Series Side Visor S700V S710V S700W S710W Door Visor | Toyota Pixis Van Visor 700 Series Side Visor S700M S710M Door Visor | SUBARU SUN BURBAN VISOR 700 SERIES S700B / S710B SIDE VISOR DOOR VISOR | |
| Fitment | Atray/S700 Series | High Jet Cargo / S700 Series | Pixis Van/S700 Series | Sunburban / S700 Series |
| Product Description | Visor & Rubber Mat | Visor & Rubber Mat | Visor & Rubber Mat | Visor & Rubber Mat |
|
|
|
|
|
|---|---|---|---|---|
| 2pcs Attley S700 Series Visor & Floor Mat Door Visor Car Mat | 2pcs High Jet Cargo S700 Series Visor & Floor Mat Door Visor Car Mat | 2pcs Pixis Van S700 Series Visor & Floor Mat Door Visor Car Mat | 2pcs Sunburban S700 Series Visor & Floor Mat Door Visor Car Mat | |
| Fitment | Atray/S700 Series | High Jet Cargo / S700 Series | Pixis Van/S700 Series | Sunburban / S700 Series |
| Product Description | Visor & Floor Mats (Carpet) | Visor & Floor Mats (Carpet) | Visor & Floor Mats (Carpet) | Visor & Floor Mats (Carpet) |