Feature(may vary by option.)
●This is an auto light sensor cover compatible with Toyota/Daihatsu vehicles. By switching to this product, you can decrease the sensitivity of the sensor and delay the lighting. This product is recommended for those who have trouble with the auto light up in a little light or dark
●✅ Compatible with Toyota and Daihatsu vehicles and can be easily replaced. We offer 1 18mm clear transparent cover lens and 2 pack set
●✅ Relatively easy to install. This cover may not comply with safety standards and may not pass through vehicle inspection. Therefore, it is recommended that you store the cover after installation
●Instruction manual not included. It is relatively easy to install, but please ask a professional to install. We strive to make our images as close to the actual product as possible, but there may be slight differences in the color of the actual product depending on your monitor settings, lighting in the room, etc
●Size: Diameter approx. 0.7 inches (18 mm), Height approx. 0.3 inches (7 mm), Thickness approx. 0.04 inches
[2pcs]
[1pcs]
Description
|
|
|
|
|---|---|---|
Product Specifications & Set ContentsMaterial: ABS Compatible Genuine Product Number: 89121-B203/89121-30020/89121-50020 Can be installed if the cover is 0.7 inches (18 mm) in diameter. Compatible models: Toyota (Alphard, Vellfire, C-HR, Camry, Crown, Majesta, Harrier, Rise, Highlux, Land Cruiser, MIRAI, Noah, Voxy, Prius, Sienta, Yaris, RAV4, etc.), Daihatsu (Hidett, Rocky, Tanto, Tuft, etc.), Lexus (IS, LC, LX, NX, RC, RX, etc.) Set Contents: Main unit only |
Installation InstructionThe sensor part can be detached (work without removing it, but due to precision equipment, we recommend removing it for work. Insert a precision screwdriver or other similar components into the bottom of the sensor cover, and lift it lightly before removing the original cover.Please install this cover while not touching the sensor part.Attach the sensor body to the original location and youre done. |
PrecautionsDue to the difference in time adjustments due to the installation of the product, there may be differences in the circumstances and other circumstances, so we cannot respond clearly.This product is a generic product and is not an official product, so you may not know about vehicle inspection. Please be sure to store the genuine cover before replacing.When removing the sensor, be careful not to pull too much of the wires to disconnect the wire.Installation may not be possible depending on the year or grade.Please check the shape of the product image.Instructions not included.Installation support is not provided, so please ask a professional if you are concerned about it.Small scratches may occur during transportation from overseas.Product color and specifications may differ depending on the lot. |
|
|
|
|
|
|---|---|---|---|---|
| Sensor Cover 18mm | Sensor Cover 18mm | Sensor Cover 18mm | Sensor Cover 18mm | |
| Customer Reviews | 3
| 3
| 3
| 3
|
| Price | ¥2,980 | ¥1,780 | ¥4,580 | ¥1,782 |
| Color | Clear Color | Clear Color | clear black | clear black |
| Quantity: | 2pcs | 1pcs | 2pcs | 1pcs |
| Tools Included | ✓ | ✓ |
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| 6.5" Inner Baffle | Rod Stand | Fishing Rod Clip | Hybrid Wool Buff | Retractable Tow Hook | Dummy Duct | |
|
|
|
|
|
|
|
|
| Customer Reviews | 1
| 1
| 5
| 3
| 1
| 3
|
| Price | — | — | — | — | ¥1,580 | — |
| Body Color: | Black/White | Black | Black/Red/Blue | Black/White/Carbon | ||
| Quantity: | 4pcs/2pcs | 8pcs/4pcs | 4 PCS 2 PCS 1 PC | 2pcs/1pcs | 1pcs | 2pcs |
| Features | General Purpose Inner Baffle BoardImprove the sound quality of your car | Storage for fishing rodCan be fixed in the car or cooler box. | The rubber material provides excellent holding power and is scratch resistant on the rod.Can be mounted to interior ceilings, bars, etc. | Car wash finish etc.Velcro closure to fit various manufacturer equipment | Easy to install dress up partsCustom made to fit your vehicle. | Dress up your carWe aim to create a unique style.Effortlessly Sporty |