Feature(may vary by option.)

●Thickness = 0.2 inch (6 mm)
●Inner screw = Coarse [Pitch: Approx. 0.04 inch (1.0 mm)]
●Note on product images) This is a representative size image. Length of each part such as engraving, thread portion, pitch, etc. varies by size
●Note: Please be sure to check the drawing for the size and other items

[M10]

Description

■Shape: Enzart
Insert nut for reinforcing the screw part on soft materials such as aluminum and resin.
The inner and outer diameter of the tapping insert is threaded and has a cut blade such as a split groove and three-hole type.
No pre-tap is required for the bottom hole and is resistant to pulling and loosening

■ Thread Shape: Coarse
It is the most standard pitch in Japan as prescribed by ISO (International Organization for Standardization) standard. The most frequent distribution in Japan.

■Material: SUS430
Although it is not as corrosion-resistant as stainless steel (equivalent to SUS304), it is a ferrite type stainless steel that is magnetic.
Compared to SUS410, it has excellent corrosion and heat resistance. The price is low so it is widely used. It also has good welding.

■Surface treatment: fabric
Surface treatment/plating is untreated.
Therefore, corrosion resistance and appearance are the characteristics and color of the material itself.

Product Features:
338 Chip Free Type
● The cut blade of the 3 round holes in the outer circumference is a stop hole, which is used to seal the particles that are released during insertion.
When inserted, the shavings may be slightly outside, but the majority fits into 3 round holes (chambers) so there is no need to deal with the cutting process.
If your opponent is metal, please use the hole diameter at the maximum hole diameter.
Longer than the 337 model.