Feature

●Weights fit inside the neck (inside the shaft) when assembling the golf club
●This weight is 1. Carbon, iron, 2. 1. 3. Weight is adjustable
●Standard weights are 1. For use with carbon or irons. 2. You will have to buy a lot of items that cannot be adjusted. 3. If you are not satisfied with your expectations. Professional workshop is good, but it will end up increasing the product cost, shipping and time
●Weighs 8g and increases the balance by about 4. Cut in half to create a balance of 0.1 oz (4 g) to increase the balance, or cut into 1/4 to adjust the 0.08 oz (2 g) to 1 UP. It is recommended that you trim it slightly by bit while temporarily
●Steel shafts will not get in the crank. When installing the head, you can put a little glue inside the shaft to ensure it is completely fixed. Just like the basic, but keep the head facing down and wait for it to harden


Description

Weights fit inside the neck (inside the shaft) when assembling the golf club.

This weight is approx.
1. Carbon and iron are common
2. 1 type.
3. The weight is adjustable.

Regular weights
1. For use with carbon or irons.
2. The weight cannot be adjusted, so you have to buy a lot of thought to expect it.
3. If you are not satisfied with your expectations, please buy again.
Professional workshop is good, but for general people will end up high on product costs, shipping fees, and time.

Weight: 0.3 oz (8
Increases balance by about 4 Cut in half to increase balance, 0.1 oz (4 g) to 0.2 oz (2 g).
By cutting it into 1/4, you can adjust it from 0.08 oz (2 g) to 1 up balance.
It is recommended that you trim it slightly by bit while temporarily.

Steel shafts will not get in the crank. When installing the head, you can put a little glue inside the shaft to ensure it is completely fixed.
Just like the basic, but keep the head facing down and wait for it to harden.