Feature(may vary by option.)

●Thickness = 1/2 inch (12.7 mm) x Length = 5.9 inch (150 mm)
●Screw part = Left screw / wit (rough point) [Pitch: Approx. 0.08 inch (2.12 mm]
●Note on product images) This is a representative size image. Length of each part such as engraving, thread portion, pitch, etc. varies by size
●Note: Please be sure to check the drawing for the size and other items

[W1 & 2×400]

Description

■ Shape: Cutting
Fully Threaded Rod Thread Also known as "long screw" and "full screw".
No head or tool hole.

■ Thread shape: Left screw/wit (rough end)
It is also called "reverse screw" by turning the left and screwing into the screw. Pitch is the wit standard set in England. Unlike other standards, the thread angle is 55 degrees, and the pitch is roughness than the nations most standard pitch (coarse) prescribed by ISO (International Organization for Standardization) standards.
The screw tip surface is not processed while the material is cut during pressing. It may not be suitable for precision areas.

■Material: Iron
"Iron" is "steel" and is an alloy of iron containing carbon.
Although it is commonly used in many circulations, it is cheap materials, but due to the downside of it is easy to rust, many surface treatments will reduce corrosion.

■Surface treatment: fabric
Surface treatment/plating is untreated.
Therefore, corrosion resistance and appearance are the characteristics and color of the material itself.