Feature

●(Receiver/Transmitter Set) Motion Sensor Transmitter: Motion detection function that can accurately detect visitors etc. The sensing distance is 9.8 - 25.6 ft (3 - 7 m), and the detection angle is 15 degrees up and down to 100 degrees left and right. Rotate the sensor to freely adjust the sensing direction. Reception chime that requires no batteries (just plug it into an outlet): It will notify you with blue light and chime sounds from a distance. The reception distance of the receiver is 200 meters indoors without any shielding outside, and up to 70 meters in high visibility areas
●38 different melodies and sounds and lights: The receiver can be adjusted to 3 levels, and the volume control button can be adjusted from 25 to 80 dB (low, medium, high). Press the calling sound setting button to switch between 38 calling sounds each other. Long press to switch in opposite direction. In addition, there are two modes of "Light/Sound/Light": Comes with a switch, making it very convenient for those with noise or ear disabilities
●Battery Operated, Easy Installation: The wireless chime uses radio waves that are non-contact and hygienic than the button press, making it the perfect door chime to notify people when entering or exiting the entrance of your entrance, or store. Just plug the receiver into an outlet, and the transmitter is battery operated (3 AAA batteries or 2-way power via micro USB), so you can install it anywhere (*Batteries not included). You can secure it to any location with double-sided tape or screws included
●(Useful in a variety of locations) Can be used as a door chime for visitors. Can be used as a call bell for elderly and those with disabilities. Can be used in a wide range of locations, such as for calls in noisy places, such as shops, offices, factories, warehouses, etc
●(Reliable Manufacturers Warranty) This sensor chime comes with a 1 year quality warranty. If there are cases of defective or defective defects or other questions, after receiving the product, please contact us via Amazon Order History > "Contact Seller". We will respond to our sincerity


Description

Wireless Chime
Operating principle: When the motion sensor transmitter detects movement, the receiver will notify you with light and chime sound.
Recommended Use: Entrance entrances and stores, noisy places such as factories and warehouses, and for elderly people with disabilities, etc.

Product Specifications:
1. Receiver operating voltage: 110-240V
2. Transmitter operating voltage: 4.5V (3 AAA batteries)
3. Operating distance: Approx. 328.4 ft (100 m) (straight view and no shielding environment).
The signal reach distance is a theoretical value. Distance varies depending on the situation and environment.
4. Battery: 3 x AAA batteries (sold separately).
5. Transmitter detection distance: 9.8 - 25.6 ft (3 - 7 m)
6. Sensing angle: Up and down 15°, left and right 120°.
7. Receiver Size: Approx. 3.0 x 3.1 x 1.3 inches (76 x 80 x 33 mm).
8. Transmitter Size: Approx. 3.5 x 3.1 x 2.1 inches (90 x 80 x 53
9. Package Size: Approx. 6.9 x 4.3 x 3.0 inches (17.5 x 11 x 7.5 cm).
10. Weight: 0.24kg
11. Color: White
12. Operating environment temperature: 32 - 104°F (0 - 40°C).

Pairing Flow:
How to Pair:
1. Power the transmitter by USB cable (if not paired, the receiver will not sound if the sensor reacts (light red light on the inside of the transmitter)
2. Press and hold the volume control button until the receiver light turns on all the time.
3. After that, the light will turn off. This indicates that it has been paired
4. The sensor can be used in conjunction with the chime.
● Unlock pairing
While pressing the volume control button, plug the receiver into the outlet (Long press until the light always turns blue and blinks and turns off).
This will disassemble the pairing.

【FAQ:
The sensor does not react / does not sound from the chime. 1. Please check if the battery is left or not, the sensor is turned on
2. Next, check the sensor and chime working.
The sensor side is turned on with a new battery and then shake your hand in front of the sensor to react with a light red light from the inside of the sensor.
On the chime side, insert the outlet and press the selection/volume control button to make the blue light glow.
3. If the chime is not problem, the sensor also flashes red light, but the chime does not sound from the chime, please unpair and repair it.
4. If you put a new battery and the sensor does not flash, please try to power it by USB cable.
5. If the sensor does not flash red light even if you replace the battery or USB powered, this is the sensors electrical circuit short.
The sensor responds to it, but it does not sound 1. First, please check if the chime is set to "sound and light glowing" mode.
If you set it to silent mode with just the light on, the sensor will respond, but the chime will only light up, and it will not be sounded.
2. If you set the chime to "sound and light" mode, if you dont hear the sound, please check the chime operation (insert the outlet and press the selection/volume button to make sure the blue light glow).
3. If the chime can work well, please unpair it before repairing.