This product is a assembly kit version that requires soldering.
Before use, it is necessary to solder the pin to the substrate.
Parts and tools such as solder and soldering iron are required separately.
Simple installation is complete, but please note that assembly errors are not guaranteed.
This is a simple assembly kit for the SON package type OPA1612 operational amplifier IC with a dedicated development board.
IC mount board and 2 pin parts set The IC is a simple assembly kit that is pre-installed, simply soldered the pin to the board.
By soldering the pins by yourself, we cut the manufacturing costs and process and we will offer it at a low price.
The quantity limit is also dissolved, so many purchases are welcomed!
After assembly is completed, the pin is compatible with DIP type 2-circuit optics amplifier, so you can replace it with a DIP type opp amplifier. It is also recommended as a headphone amplifier because of its high drive capacity.
We implement IC on our original circuit board that has been designed with our own and maximum pattern width.
The pattern width is expanded to the limit, and the heat dissipation countermeasures and EMI countermeasure for high sound quality.
Set Contents:
OPA1612 IC equipped circuit board x 1
Dip header pin x 2
[Additional tools and parts required separately]
Soldering iron (about 30 W-40 W), soldering stand
Solder
Flux (can not be used without needing).
[Precautions]
If you feel a distortion/noisy sound while in use, please watch again after a certain period of time.
Due to the high performance of this optics amplifier may be oscillated in rare cases depending on the device and circuit design.
If you have tried the device you use and the same, please contact us from your order history, and we will respond to you.
※We provide 1 week initial defects. Simple installation is complete, but please note that assembly errors are not guaranteed.
Instruction manual not included. Check your board cutout on the markings for pin assignment. (2-circuit DIP compatible pin configuration)
We do not accept any support on how to use this product, so please only purchase this product if you have a knowledge.
Please be at your own risk.
※We cannot deal with compensation for failure or damage to the device that has been used with this product.
Please use it for DIY purposes only at your own risk.
The price may be revised due to differences in the market marketplace.
The opire amp has polarity and is oriented. Please note that the wrong orientation of installation may lead to IC damage and damage to connection devices.
Lot number cannot be specified. The photo is a sample, so the individual item you receive may differ from the lot number.
Please allow for some error of manufacturing as this is completely manual assembly.
Product Specifications:
Set Includes: OPA1612 OPEN PLATED PCB x 1
2 x DIP Header Pins
Opamp: TexasInstruments OPA1612 (SON Package)
Operating voltage: ±2.25 V - ±18 V
Number of Circuits: 2 circuits
Finished Size: Approx. 0.4 x 0.4 x 0.3 inches (10.5 x 10.5 x 8.8 mm) (including protrusions).
Weight: 0.04 oz (