Feature

●[Features] Frequency to voltage conversion module converts frequency pulse signal from 0 to 500 Hz to 0 to 5 V analog voltage signal. Please choose to buy according to your actual needs
●【Professional Design】Frequency and voltage conversion module, the response time is about 0.3-0.5 seconds. The output current is 5MA. Durable, reliable and long lasting
●【Practical】 It can be used to convert interface between PLC and frequency, or convert the interface of transfer control card and converter according to the circumstance of control
●Practical Accessories: Input pulse level is 5V, 12V, 24V, and does not have string resistance. However, the frequency of the input signal should be maintained at least 0.5 seconds
●【Service Warranty】If you have any questions or complaints about the voltage converter, please contact customer service anytime, and our team will be able to respond to you within 24 hours


Description

Specifications:
Condition: 100% Brand New
Item Type: Frequency to Voltage Conversion Module
Model: FV-500Hz5V
Function: Input 0-500Hz frequency converts to 0-5V
Output Current: 5MA
Response time: 0.3-0.5 seconds
Size: about 4.5 x 4.7 x 1.7cm/1.8 x 1.9 x 0.7inch
Package List:
1 x Frequency to Voltage Conversion Module
Precautions for Use:
1. Use the multi-turn potentiometer on the board to calibrate the response relationship between frequency and voltage.
2. Input power supply voltage range is 12-30VDC. It is recommended that the power supply voltage is 15-24VDC. If you use the 12V level, you will not be able to supply power from 12VDC. Requires at least 15VDC power supply. If you need to use 12V power supply, you can also order 12VDC. Power Converter At 24 levels, power supply must be powered by 24VDC
3. The signal input is separated by diaphragm. Guaranteed to prevent interference
4. Support NPN type for use with PLC. Ground wire is required.
Identification and Wiring:
1. 12-30V--Positive power input
2. GND-Power input negative (common ground wire)
3. GND-pulse frequency input negative (common ground wire)
4.0-10KHZ--If the pulse frequency input is positive.
5. GND-pulse frequency input negative (common ground wire)
6. 0-10V--Analog 0-10V level output
Corresponding Alignment Relationship:
50Hz converts to 0.5V
250Hz converts to 2.5V
500Hz converts to 5V