Feature

●Jumpers A, B are used to control audio effects in bass range. A represents the lower bass, B represents the bass limit. For some speakers, the speaker will be distorted if the bass is too high
●In that case, remove the jumper cap from the jumper A to limit the ultra-bass and reduce distortion. When you remove the cap of the jumper B, the bass increases when the jumper B cap is on, and the bass will be reduced. Jumpers C and D are used to control treble range. When both the jumper C and D caps are on, the treble will be the loud
●If Cap C is only on, the treble will be lower. If Cap D is only turned on, it will be lower. When both C and D caps are removed, the treble will not be produced. (In general, using 4 jumpers will help you find the best sound effects late or earlier. Anyway, all effects depend on actual testing. )


Description

How to use the splitter board:
First connect (high,low,input) and connect to speaker, seal the space. Start listening to music while optimizing
Usually, use jumper A to turn B into idle state. For Jumper C and D: You need to hear the actual effect of treble sounds. Common formulas are as follows: A+ D = Better Bass A + C = Cleans the treble and bass A + CD = Clear treble and base (overall effect is leaning to treble); + CD = more mid frequency Cap A can be removed if the bass effect is unnecessarily high. Optimize until sound is better and secure the board with the speaker unit.
Power: less than 400W
Resistance: 4-16 Ohms
Frequency: Adjustable
Color: Red
Material: PC + Metal

Package Include:
1 x Divider

Package contents above and other products are not included here.
Note: The color and size of the actual item may vary slightly from the color and size on the website due to lighting and display conditions. The margin of error for the measurement is 0.4 - 1.2 inches (1