Feature

●Double-sided diamond whetstone: Double-sided type with different granularity: #400 (rough grinding surface) #1000 (medium finish surface) Whetstone size: 7.9 x 2.8 x 0.3 inches (200 x 70 x 9 mm); Weight (approximate): 16.9 oz (480 g); ABS resin whetstone base included. Comes with a pedestal for a non-slip design. There are anti-slip on the bottom of the four corners. Comes with a lid, so it can be stored neatly. Note: After use, clean the abrasive debris thoroughly and store the entire item in a rust-free way. After washing with water, wipe away the moisture and allow it to dry thoroughly before storing it. Do not use oil. This may cause clogging
●[#400 (Medium Sharpening Knife Sharpener) #1000 (Medium Finish Surface) Features: Grit Size #400 (Rough Sharpening Surface) When the blade is crushed. #400 is more abrasion resistant than general grindstone and requires no modification of the grindstone surface. Use the #400 rough abrasive surface for correction when the blade is chipped. A diamond whetstone that can sharpen hard metals such as carbide metals. Ceramic knives that were not possible with conventional whetstones can also be used. It can also be used as a correction whetstone for surface modification of uneven whetstones. Granularity #1000 (medium finish): When it runs out. The #1000 medium finish surface should be used when the blade has a loss of sharpness. Fine sharpening (diamond whetstone 1000#) is used for daily use when the blade becomes dull. After polishing, remove fine unevenness and burr for smooth use. Sharpener blades from household knives to carbide alloys
●Knife Sharpener Clip: Includes a knife sharpener clip that is essential for beginners. Just clip it to the knife at the perfect angle, even for beginners. Just move the knife up and down to sharpen it cleanly. Tilt the angle of the blade to the flat surface of the grindstone 10° to 15°, use the auxiliary grip and slowly move the knife back and forth to sharpen the entire frog from the edge to the jaw
●Features: Double-sided type with different granularities for improved work efficiency. Polishing carbide hard, hardened steel, ceramic, etc. Polishing knives, scissors, etc. Blade sharpening from household knives to carbide alloys. Sharpening methods should be sharpened just like a normal whetstone. Itamae, Carpenter, Barberist, Swordsmith, Farm Tool, Chisel, Canna, Carbide Chisel, Drill Bit, Household Knife, Commercial Knife, Scissors, Japanese Katane, Katana, Sheath, Hoe, Ceramic Whetstone, etc
●Note: The whetstone surface may have scratches at the time of manufacture, so please refrain from purchasing if you are concerned about it. Diamond whetstone can wear and tear after each use of consumables. In that case, please buy a new one
●Safety Precautions and Quality Assurance: Note: Please wear protective gear such as work gloves and protective glasses. Not dishwasher safe. Hand washing is recommended. Please check the instruction manual and instructions carefully before using this product. In case of initial defects, the manufacturer warranty will be provided within 30 days of purchase. If there is any defective product you purchased, we will send you the best products as soon as possible. Buy with confidence! We will replace it free of charge if there is any defects during normal use. We apologize for your inconvenience, please contact us through your Amazon purchase history. We provide reliable quality and best after-sales service


Description

Double Sided Diamond Whetstone with Base #400 #1000 Whetstone Knife Diamond Whetstone Double-Sided Whetstone
Double-sided Knife Sharpener, Sharpener, Rough Sharpening, Face-Facing, Whetstone Stand, Medium Finish, Knife Sharpener Clip Included

★ 2 sided type with different granularity!
★ Comes with a base to improve your work efficiency.
★ 2-sided grinding: #400 side for coarse sand grinding, #1000 side for fine sand grinding.
★ EFFICIENT MATERIALS: This whetstone uses diamond as a polishing stone. More effective than regular grindstone and less risk of damaging edges.

■Product Specifications:
Whetstone granularity: Diamond whetstone #400 (rough grinding surface) #1000 (medium finish surface)
Material: Whetstone / Diamond plate / Whetstone base / ABS resin
Whetstone size: 7.9 x 2.8 x 0.4 inches (200 x 70
ABS Whetstone Base: 8.9 x 3.5 x 1.2 inches (227 x 90 x 30 mm)
Weight: Approx. 16.9 oz (480 g).

■【Package Contents】
1. Double-sided diamond whetstone (with ABS resin whetstone base) x 1
2.Knife sharpening clip x 1
2. Japanese instruction manual x 1.

■【2-in-1 Diamond Whetstone Selection】
Rough (diamond whetstone #400): Use for dull knives and blades with severe damage. Normally once polished, it will last for 6 years.
Fine (diamond whetstone #1000) is done at the end of the product. After polishing, remove fine unevenness and burr for smooth use.

■【Strong polishing power】
This product has fine and high density porosity, so it can be sharpened immediately by lightly wetting it.
The whetstone is hard and has excellent polishing power, so it can be sharpened in a short period of time than normal.
In addition, it can also be used for sharpening ceramic knives and other types of knives unique to diamond whetstones.