[2.5mm]

Hole diameter:0.5mm, 0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm
Out Diameter: 17.8mm
Total length: 2.7 inches (68 mm)
Oil Inlet: 1 8"
Air inlet: 1 4 inches
Nozzle Size: 9 16 inches
Note: The diameter of the connector of this product is 6mm or 8m. By default, the connector is 8mm in diameter.
Working pressure is 3 bars:
0.5mm in diameter, fluid water flow is 4L H
Diameter 0.8mm, liquid water flow is 6L.
1.0mm in diameter, 8 liters of liquid flow.
1.5mm in diameter, liquid flow is 11L H
2.0mm in diameter, fluid water flow is 14L H
2.5mm in diameter, fluid water flow is 17L H
Diameter 3.0mm, liquid water flow is 20L H
3.5mm in diameter, liquid water flow is 23L H
4.0mm in diameter, liquid flow is 26L H
The height of the siphon is 30cm and the spray angle is 15-45 degrees.
The above data is based on water for reference
Product Introduction
The Siphon Air atomizer nozzle is a low pressure that can be used to spray the best atomization with a low pressure air atomization nozzle.
Widely used in diesel, heavy oil, waste oil, animal and vegetable oil, alcohol based fuel burner systems.
For kerosene, oil atomization.
Product Features
Use of compressed air
Whirl inside the tube and mix the impact of the atomized liquid drop.
It can produce small micro particle size mist particles in low pressure and low volume conditions.
Control air flow and pressure to adjust spray flow, angle and size granularity.
Because of the large fluid passage, it is therefore a good preventative effect.
In heavy oils, the viscosity of waste oil burners, oil, and other dispersing of liquid atomization effect is very good.