[Finishing buff]

[Iron Buff]

Product Description:
This GC whetstone is ideal for finding chip saws, outer diameter: 5.9 x thickness: 0.2 inches (150 x 6.4 mm) for double head grinders.


Use it on a tabletop grinder.

Note:
In order to safely use the grinding stone, please read the safety instructions attached to the product.
Warning: If used incorrectly, the whetstone may break down and lead to death or serious injury. The whetstone is safe when used correctly. However, if you use it incorrectly or handled with careless machines, it will lead to breaking the whetstone. ; Be sure to observe safety work.
> Handling the whetstone is to follow the three principles of "no shine, no dropping, or bumping". ; Store the whetstone in a dry place with an organizer. ; Before installing it on a machine, please test the cracks, cracks, cracks, cracks, and hitting sounds. ; Ensure that the maximum usage speed and dimensions displayed on the whetstone are compatible with the machine. ; Flanges should be used with the appropriate outer diameter and contact width equal to the left and right. ; Use the label on the whetstone. Labels are larger than the flange diameter and will not bunch or crumble ; Balancing with balance weights ; The gaps on the whetstone and workrest are less than 0.1 inches (3 mm) and the gaps of the grindstone and adjustment pieces should be adjusted within 0.1 - 0.4 inches (3 - 10 mm). ; Always use a whetstone cover that is 1/2 or more of the whetstone is appropriate. ; Please test the timing for more than 1 minute before starting the day and when replacing the whetstone for more than 8 minutes. ; Wear protective gear such as protective glasses and dust mask while working. ; To avoid balance misalignment, please remove the grinding fluid and shake it completely, then tighten the rotation of the whetstone. ; Prevent sparks from scattering with a squat plate or other ; To prevent dust from escaping and adequate ventilation to prevent respiratory diseases. ; Use of inspected and serviced machines correctly.
Do not use whetstones that have been dropped, crashed or unobstructed by inspection. ; If the hole diameter of the whetstone does not fit the machine, please do not force it or modify the hole diameter. ; Do not use the maximum cycle speed shown on the whetstone. ; Do not use flanges that have deformation, scratch, or rust on the surface of the whetstone. Do not use flanges that do not have escapes. When using a whetstone with nuts, please do not use a flange (pedestal) that has a escape. ; Do not overtighten the nut when installing the whetstone to the flange. ; Do not use the sides other than whetstone intended for side use. ; Do not rotate the whetstone before installing the whetstone cover. ; Do not force the work to the whetstone. Also, do not force the whetstone to the processed object. ; Do not touch the body directly on the whetstone while rotating. ; Do not stand in front of the rotation direction of the whetstone when trial driving. ; Do not grinding work in places where fire or explosion may occur. ; Do not enter the range of sparks. ; Please do not replace or test the whetstone if you are not in safety education.