Screwless terminal block that can be wired simply by inserting a wire. It can be split into plugs and receptacles like a 2-piece construction and named connector.
Press and hold the button when plugging and unplugging the wire. After inserting the wire, release the button to lock in place.
Package
Contents: Plug and receptacle set.
Number of poles: 2
Pitch: 0.1 inch (3.81 mm) between terminals.
[Specifications 2]
Rated DC300V-5A
Voltage tolerance: AC 2,000 V (1 minute)
Insulation resistance: DC 500 V, 100 MΩ or more
Total contact resistance (initial value) less than 30 mΩ
Main insulation material
Main body and button: Nylon 66 (UL94V-0)
Rated Compatible Wire Single Wire: φ0.03 inch (0.8 mm) (AWG20), Stranded Wire 0.02 inch (0.50 mm) (AWG20).
Usable wire range: Single wire: 0.02 - 0.05 inch (0.4 - 1.2 mm) (AWG26 - AWG16), Stranded wire: 0.008 - 0.05 inch (0.2 - 1.25 mm2 (AWG24 - AWG16), bare wire diameter or higher
Standard stripping wire length: 0.4 inches (9 mm)
Operation part: White
Recommended compatible tools: Flathead screwdriver; Can be used with anything you can push the button.
Certifications: UL standard (field wiring), C-UL, TÜV standard (IEC61984)