Production Description
Probe: Iron + NFE
Range: 0 to 1300 microns
Resolution: 1 micron
Unite: Eat, Millimeter, Mill
Calibration Step
Click the CAL 4 times to enter NFE mode
Click the CAL 6 times to enter iron mode
When the display reads 0, place the probe on the plate.
When you read the 50, place the 50μm film on the plate and click the POWER button to test.
Repeat these steps for 100, 250, 500 and 1250.
Do not place the probe on the plate - when the display reads the AIR then press the power button to calibrate, then switch the probe to AIR mode.