[soft]

Compatible models:
Typically, you will need 2 pieces for the left and right side.

For rear applications such as JB64, JB74, etc. (requires sold separately for installation), SJ30, JA11, JB31, JA12, JA22 and other front (unfinished installation). The JB23, JB33, JB43 can be installed using the front 8 bump bracket.

You can install the JA11 or JB31 rear bump bracket JA11 for the rear of the JA11. JB23, JB33, JB43, JB64, JB74 can be installed using the rear 8 bump bracket JB23.

Product Description:
Compared to the previous type 8 bumper rubber on the market, the hollow part is reduced and the thickness is 1.5 times and the capacity is about 2.4 times
As the thickness and capacity increases, the hollow portion is less likely to warp or warp and will ensure a tight hit of the hose.
The mounting part has a long hole so you can adjust the hitting position.

Dimensions (H x W x Thickness): 3.9 x 3.3 x 2.0 inches (100 x 84 x 50 mm). For reference, the height of the genuine bump is about 40mm in front, and the rear is about 50mm in height. The 8 shape bumps that are used in the traditional, have a height of 3.1 inches (80 mm).

Available in 3 types: Hard (70% hardness), soft (60% hardness) and super soft (50% hardness). If you are looking for shock absorption, please choose soft if you want to keep super soft. It has a soft but stiff bumping touch, but if you need more precise bumps, please choose hard.
For reference, the hardness of the traditional 8 bumper rubber is about 55.
If you feel stiff when using JSTC, please cut or remove meat before using.

[Precautions]
Please adjust the position when contracted, so as not to interfere with caliper or coil.
Instruction manual not included due to various types of vehicles and installation methods. Please contact us if you have any questions.
Sold as 1 EA. Typically, you will need 2 pieces for the left and right side.