Feature

●Even with relatively soft metal, you can cut the threads from the hole without the use of a tap for the punch, but for very hard steel, it can be used to fix the thread
●Due to the import process, the burrs may have slight individual differences in size, and there may be minor scratches, stains, etc
●Please refrain from purchasing if you are looking for high quality and performance products or concerned about the condition of the product
●Sold as a set of 2 (1) tap, 1 (1) dice. We do not sell separately
●We will refuse returns and exchanges for reasons such as the size of the product that is not suitable for use
●※We will determine that your understanding is after your order


Description

Product description

■ Tap Dice M11x1.5 ■ The outer diameter of the screw is the standard for "11 mm" pitch as "1.5 mm". ■ Please use a special handle for dice diameter 1.0 inches (25 mm), diameter 1.0 inches (25 mm). ■ Tap Total Length Approx. 3.2 inches (81 mm) Base Width Approx. 0.2 inches (6 mm) ■ Dice Thickness Approx. 0.4 inches (9 mm) ■ Weight: Tap Approx. 1.1 oz (31 g) Dice Approx. 0.8 oz (21 g) ■ This product is a set of taps and dice. (We do not sell them separately. This is a convenient size for machine maintenance and DIY, as well as automotive-related maintenance. ■ When recreating the look, apply lubricant and rotate 180 degrees and repeat the 90 degrees back according to the normal work procedures. ■ Even with relatively soft metal, you can cut the threads from the hole without the use of a tap for the punch, but it can be used to fix the threads with very hard steel. Please refrain from purchasing if you are looking for the quality of Japanese products or concerned about the condition of the product. We refuse using using the images and product description of our tools directly (Co., Ltd.) (In order to prevent the image from being reprinted, our company name is written on the product image, but it is not listed on the actual product. )

Legal Disclaimer

■ Even with relatively soft metal, you can cut the threads from the hole without the use of a tap for the punch, but for very hard steel, it can be used to make a correction. ■ There may be cases where the product may be opened. We appreciate your understanding. Due to the import process, the burrs may have slight individual differences in size, and there may be minor scratches, stains, etc. Please refrain from purchasing if you are looking for the quality of Japanese products or concerned about the condition of the product. This product is sold for those with some knowledge of installation and tools. Please note that we cannot accept any questions or support regarding compatible models, installation, basic uses, etc. Please contact a professional if you are unsure about handling this product. We cannot accept any returns for faults, such as injuries or damages due to use methods that are not used in the regular method. Thank you for your understanding. All returns and exchanges will be refused for reasons such as reasons such as the size of the product may not fit. ※We will understand that the details on the product page are confirmed. Thank you for your understanding