■ [Tap and Dice Size] M9 x 1.00 ■ The outer diameter of the screw is 0.4 inch (9 mm) pitch is 1.00 mm standard. ■ Please use a handle for "dice diameter 1.0 inch (25 mm) diameter only. ■ Tap Total Length Approx. 2.8 inches (70 mm) Base Width Approx. 0.2 inches (6 mm) ■ Dice Thickness Approx. 0.4 inches (9.5 mm) ■ This product is a set of tap and dice. (We do not sell them separately. Small pitch is often used when joining different materials. For example, aluminum alloy and iron, brass and resin etc. ■ When recreating the look, apply lubricant and rotate 180 degrees and repeat the 90 degrees back according to the normal work procedures. ■ Even with relatively soft metal, you can cut the threads from the hole without the use of a tap for the punch, but for very hard steel, it can be used to make a correction. ■ There may be cases where the product may be opened. We appreciate your understanding.
■This product will be delivered by post mail. ·Delivery date and time of delivery cannot be selected. Please note that due to the thickness restrictions, packaging may be simple. ■ There may be cases where the product may be opened. We appreciate your understanding. Due to the import process, the burrs may have slight individual differences in size, and there may be minor scratches, stains, etc. Please refrain from purchasing if you are looking for the quality of Japanese products or concerned about the condition of the product. This product is sold for those with some knowledge of installation and tools. Please note that we cannot accept any questions or support regarding compatibility, installation, basic use, etc. Please contact a professional if you are unsure about handling this product. We will not accept any returns for defects due to usage laws that are not used in regular usage, or liability for injuries or damages. Thank you for your understanding. We will refuse all returns and exchanges due to reasons such as the size of the product that is not suitable for use. ※We will understand that the details on the product page are confirmed. Thank you for your understanding