[2 A4 size (210mm x297mm)]
[2 A5 size (148mm x210mm)]
Specifications: Material: Acrylic resin; Color: Transparent (visible light transmittance 92%); Thickness: 0.04 inch (1 mm); Specific Gravity: 0.04 inch (1.19 mm); Shockproof: Impact resistance strength is 10 to 16 times harder than glass. The acrylic surface is almost the same as aluminum. Can be refinished with shallow scratches or scuffs. Electrical Insulation: Withstands high voltage and is widely used as an insulation material. Notes on acrylic properties; Please be careful to change due to temperature and humidity. Acrylic has a large thermal expansion coefficient. In general, if there is a temperature difference between 24°F - 40°F (10°C - 20°C), it will stretch about 0.2 - 0.08 inches (0.5 - 2.0 mm), so please take into account the stretch due to temperature changes. Also, due to changes in humidity (water absorption rate is 0.3%) may stretch or warp. Please be aware of the usage and usage environment. Please be careful of high temperatures. Acrylic is thermoplastic and will not deform under high temperature and return to its original shape. The suitable temperature for use and storage is -40℃ to +65℃. Please be careful of flames and high temperature sources. Acrylic ignition temperature is approximately 400 degrees Celsius. Burns slow, not flammable, but burns as much as wood. It can extinguish the fire using a general extinguishing method. Please be careful of damage. The surface of the acrylic is as strong as aluminum, and some plastic parts are hard but please handle with care against scratches. Please be careful of the garbage adhering. The acrylic surface provides static electricity, which makes it easy to adhere to dust and other debris. To wipe the surface, use a diluted mild soap with a soft cloth and then gently wipe it. Please be careful when using solvents. Acrylic can be affected by paint and solvents and may crack or discolor. DIY processing method: Cutting Can be cut using a specialized acrylic cutter. Drilling holes You can drill holes using a special acrylic bit. Bonding You can paste them together with acrylic using a special adhesive. Bend. It can be bent with a heater rod or other heat of about 330°F (150°C). Notes about this product; Made from 100% Japanese acrylic by a Japanese manufacturer. There may be a margin of error of 0.02 inches (0.5 mm). There may be some sled or cinary due to the warehouse storage and transportation condition after the factory. Caution those who are planning to use it as a splash partition; Acrylic is flammable. Do not use around fire or heat sources. Acrylic may crack or discolor on the surface depending on alcohol or disinfectant. Please use mild detergent and wipe gently with a soft cloth. Depending on the fixed method during installation, bending may occur and may not return to its original shape after extended periods of time. Cracks or cracks may occur if strong force is applied. The edges of cracks and cracks may become sharp in some cases and are dangerous. Please avoid using it in a dangerous condition that may crack or crack.