Feature

●Industrial USB Insulated Module: Adopts ADIs iCoupler signal insulation technology to fully protect your computers USB port from external short circuit, impact and other damage
●The main chip is the FT232RL which is highly stable. LED indicators for TX,RX,Power supply show progress during debugging and downloading, easy to check and useful
●Case Included: This insulated USB to TTL converter has a protective case. This prevents your hands from touching the PCB or IC
●Support both 3.3V and 5V logic TTL You can switch it by jumper depending on your use
●Warranty: DSD TECH comes with a 12-month warranty on USB to this TTL adapter. If you have any problems, please feel free to contact us


Description

This FT232 USB to TTL adapter has two insulated tips to insulate signal and power. Even if the external circuit is short or large voltage, it will not damage the USB port, so you can protect your computer.
This USB to TTL UART insulated module can handle a variety of complex and harsh conditions.

Note:
This insulated USB to TTL adapter has no pins for RTS and CTS. Please make sure you do not mind before you buy.

Specifications:
Model: SH-U09C3
Main chip: FTDI FT232RL
Insulation Voltage: 1,500 VDC voltage insulation, with continuous short circuit protection
Pins: RXD, TXD, GND, VCC, P30 (P30 is for STC MCU)
TTL Level: 3.3V/5V
USB Interface: 2.0
Maximum Speed: 3Mbps

About LED:
PWM LED: Power indicator
RXD LED: Data transfer indicator flashes when there is data from the USB port.
TXD LED: When the USB port receives data, the data reception indicator will flash.

Compatibility System List
1. Windows XP, 7, 8, 10.
2. Ubuntu 11.10, Kernel 3.0-19 and above.
3. Mac OS X 10.3-10.8 (32 and 64 bits).
4. Mac OS X 10.9 or later (64 bit).
5, Windows CE 4.2-5.2 6.0 / 7.0 and Windows CE 2013
You can download drivers from FTDI website.

Works with software
Hyper Terminals, TeraTerm, WinDBG, and all open source serial software on Linux etc.