[M10]

■Shape: Enzart
Insert nut for reinforcing the screw part on soft materials such as aluminum and resin.
The inner and outer diameter of the tapping insert is threaded and has a cut blade such as a split groove and three-hole type.
No pre-tap is required for the bottom hole and is resistant to pulling and loosening

■ Thread Shape: Coarse
It is the most standard pitch in Japan as prescribed by ISO (International Organization for Standardization) standard. The most frequent distribution in Japan.

■Material: Iron
"Iron" is "steel" and is an alloy of iron containing carbon.
Although it is commonly used in many circulations, it is cheap materials, but due to the downside of it is easy to rust, many surface treatments will reduce corrosion.

■Surface treatment: Chromate
Chromate-treated for corrosion resistance
Chromate coating is more corrosion resistant than unichrome It contains harmful hexavalent chromium and does not comply with RoHS directive. The alternative is trivalent white.
Shades are "Tan".

Product Features:
303 Model Small Outer Diameter Split Groove Type
● Suitable for small parts of highly plasticized resin.
It is thin and the outer diameter is smaller than the 302 model.
● Suitable for space constraints
● The cutting blade is longer to make it easier to work with the other material.
● The pitch of the inner and outer screw is the same.
● The outer diameter is small, so the strength of the various types is reduced than the 302 model.
● May break if inserted into metal materials.