[10ml]

Features
Hyper super versatile. Compatible with hard to stick plastic
Shock Resistant Elastic adhesive layer absorbs shock and resists shaking.
Transparent even after curing, the adhesive part is hard to notice.
Heat and water resistant, can be used outdoors. -40 degree to 90 degree
It is resistant to drip and is easy to use on vertical surfaces.
Even after hardening, it can be glued on uneven surfaces.
Continuous coating is OK. Just apply and apply it in about 5-8 minutes.
Solvent-free type with low unpleasant odors.
·Does not lose the flexibility of soft materials such as leather or cloth.
Time to be difficult to move: about 8 minutes
Time to reach practical strength: Approximately 3 hours.
Full Cure Time: Approx. 24 hours
Test conditions: Wood x wood, 23°, humidity 50°, shear test
Hardening time and adhesive strength may vary depending on temperature, humidity, and material.

Application
Super versatile, exceeding versatility. It can be used on materials that have not been stuck with conventional glues, and is widely used for hobbies, crafts, and DIY projects

What you can apply
Metal, hardened plastic (including PP, PE) *1, synthetic rubber, leather, fabric, wood, concrete, tile, ceramic, stone, glass, styrofoam, vinyl chloride (soft and hard).
1. Polypropylene and PE may not be adequate adhesion.
Please do not use for gluing precious metals or high priced items.
Do not use for adhesion or repair parts that come directly into contact with skin or food.
The adhesive surface is not sufficient for small parts (such as eyeglass frames).
Cannot be used in containers containing organisms.

Cannot be glued
Fluorine resin, polyacetal, etc.

Precautions
Do not use in places with fire.
Ventilates well for a while after use and use.
Keep out of reach of children and be careful not to prank.
Please do not use this product outside of the way you wear it.
Please be careful as it does not come off with your clothing.
Store in a cool place away from direct sunlight.
The tip of the cap is sharp, so be careful not to get injured.
Once the contents are used out, discard it as non-burnable trash according to the municipal method.

First Aid
If it gets on the skin, immediately wipe off and rinse thoroughly with soap.
If you experience any abnormalities such as feeling sick when using it, immediately move to a fresh area of air and consult a doctor if necessary.
In the event that it gets in your eyes, do not rub off with a large amount of water and consult a doctor immediately.
If swallowed, please wash your mouth immediately and consult a doctor immediately.
In the event that symptoms such as itching or inflammation, please stop using it immediately and consult a doctor.