Instructions for use
Working Parameters Setting:
Hold S1 key and after 0.5 seconds it shows P-xx on display, press S2 and S3 to change working mode.
After selecting working mode, short press S1 key to enter A time setting, the screen will show Axxx. At this time, press S2 and S3 to change the A hour parameter, press S2 and S3 to add 1, long press to adjust 10 quickly, press S4 to set decimal position.
After setting A time, press S1 again to set B time, the screen will show bxxx. At this time, press S2 and S3 to change the B time parameter, press S2 and S3 to add or subtract 1 or subtract and long press to quickly add 10 or subtraction, press S4 to set decimal position.
After setting B time, press S1 again to set C time, the screen will show Cxxx Press S2 and S3 to change the c time parameter. Short press S2 and S3 to add or subtract 1, long press to quickly add or subtract 10, press the S4 button to set decimal position. After setting the time, press S1 to enter the setting of the d parameter, d parameter is a number of times parameter, and range is 1 to 999. After setting the parameter, press S1 key to exit the setting state, and save all parameters.