User can set the relay time X and Y
Setting time is similar to P1-2.
Relay specifications: AC 220V 10A or DC 30V 10A
Static current: 20mA, Operating current: 50mA.
Operating voltage: 10-16V (if you can customize other range) Single Voltage: 4V-20V (if you can customize other range)
Life: Approximately 100,000 times
Operating Temperature: -40~85 Celsius
Package Content: 1 x DC12V Delay Timer Control Switch Module
Note: The color and size of the actual item may vary slightly from the color and size on the website due to lighting and display conditions. The margin of error for the measurement is +/- 0.4 - 1.2 inches (1 - 3 cm).
Automation DC 12V LED Display Digital Delay Timer Control Switch Relay Module
Work Mode Selection: After turning on the power, hold K12 and enter the selection function mode, choose between P1-1 and P1-4.
P1-1 Operating Mode: Signal - trigger relay, time runs out, the relay can cut the user, you can set the intermediate time T. Click K2 and the 10 digital tube flashes, press K3, and the 10 digital tube flashes, press K3, 10 digits change; Click K2.
Bit digital tube blinks, click K3, single digit change; Click K2, the digital pipe does not blink, press K3, shift decimals, ABIT decimals 10, 0? It indicates 999 minutes, represents 0 to 99.9 seconds, and decimals from 0 to 999 without representing
A good choice and time setting is complete.
P1-2 Working Mode: Signal trigger, digital countdown starts, after X seconds, Y seconds lying open, and then close.
The user can set the intermediate time X and Y. P1 - 1 different time settings, the intermediate time and the blue light indicates the setting relay off time.
P1-3 Working Mode: X Second Open, Y Second Disconnect, Infinity Loop