[Small black]
The magnet on the bottom of the door frame is intended to align the flap after the swing. Does not function as a lock.
Please refer to the actual picture for the style of cat door installation icon
1:First draw the size of the door cover with one piece of paper (there may be a few millimeters error).
2: Draw the door and draw a good print with pencil.
3: Drill holes in the corners of the painted door with a drill bit, if there is a chain saw, start digging holes directly.
4: For glass doors, use the glass drawing tool to gently cut open and secure with glass adhesive.
5:Rinse the holes. Next, first wrap a layer of wood around the holes for beauty.
6: Attach the cat door with the included screws, use a screwdriver to tighten the screws.
7: The screw port also comes with a screw cover, so you can press it.
※ There may be cases where it cannot be used depending on the size of your pet, so please make sure to check before purchasing.
Tools required: pencil, ruler, saw, drill, screwdriver.
1. Determine where to place the pet door on the door of the room (generally 3.9 - 5.9 inches (10 - 15 cm) from the bottom of the floor).
2. Place the pet door against the door, draw the inner line with a pencil, drill a hole with a saw and cut a little larger than the inner line.
3. Make sure that the pet door is fitted with the hole once and drill the screw hole in the product where the screws are marked (using a 0.5 inch (12 mm) diameter drill).
4. Place the screws into the holes that have been drilled and tighten the screws to the depths of the installation is complete.
✧ You can set it according to the thickness of the wall using scissors, so it easily fits on the door.