Product Description of Dust Cut Filters

Product Name: 4651374

Function: Captures 99.97% of fine particles of 0.3 microns, effectively blocks fine particles, dust, pollen, etc.Keep your space clean.

Dust Filter Maintenance Frequencies

Recommended Care Instructions:

Clean once a week.For homes with pets, twice a week.

Estimated replacement times:

Every 2 monthsReplace if the surface of debris gets stuck to the surface and the suction force weakened.Depending on how often you use and the environment, the life of the filter will be different.There are signs of growth of bacteria already occur, such as the unpleasant smell and odor from the exhaust.It is better to replace a new filter.

How to clean the Dust Cut Filters

Remove the dust container.Pull out both ends of the filter and remove the filter.Remove the filter on the trash can and remove the debris.Put the filter back to the correct position.Attach the dust container to the robot.

(If you want to replace, install a new filter. )

High performance HEPA filter

Adopts a high quality vacuum HEPA filter that captures 99.97% of microscopic particles from 0.3 microns, effectively blocks fine particles, dust, and pollen.Deflates cleaner air than air in the room!

Product Details of Edge Cleaning Brush

Model Name: 4650964 / 4747487

Features: Specially designed at an Irobot unique angle to ensure trash can is trapped in.Removes hard to remove debris from walls and corners of room.

Edge Cleaning Brush Maintenance Frequencies

Recommended Care Instructions:

Clean once a month (twice a month in homes with pets).

Estimated replacement times:

Replace the brush when worn or damaged.Depending on the usage conditions, the estimates of replacement may vary.Parts must be replaced if worn out.

Note for Edge Cleaning Brush

The holes are made smaller to allow the screws to be locked tightly.Screwdriver installation

The hair of the edge cleaning brush may be slightly bent due to incorrect transportation, but it will return to its original shape after heating it in warm water.

Directions: Soak in warm water for about 4 minutes, remove and drain.The edge brush will be straight.

How to maintain the edge cleaning brush

Use a coin or Phillips screwdriver to loosen the screws while holding the edge cleaning brush.Remove the edge cleaning brush to clean and put it back into place.(If you want to replace, install a new edge brush. )

Product Details of Dual Action Brushes

Compatible model name: 4651223 / 4734806

FUNCTION: The edge cleaning brush lifts out debris with 2 rubber dual action brushes and power lift suction removes fine debris and pet hair without escaping.

Dual action brush maintenance frequency

Recommended Care Instructions:

Clean once a month (twice a month in homes with pets).

Estimated replacement times:

Replace the brush when worn or damaged.Depending on the usage conditions, the estimates of replacement may vary.Parts must be replaced if worn out.

How to maintain your Dual Action Brush

Push the brush frame removal lever inward and lift lever to remove foreign objectsRemove the brush from the main unit.Remove the brush cap at the end of the brush, remove debris from the inside, and attach the brush cap.Removes debris that accumulate around the axis on the opposite side of each brush.

Remove the dust container from the robot and remove debris accumulated in the suction port.Match the shape of the brush shaft to the shape of the brush illustration on the side of the main body, and attach the brush to the robot.

Precautions for Dual Action Brushes

The rubber material of the roller is polished to the surface, so there may be some noise when you start using it.

It is not guaranteed to happen, but if happens, it can be straightened for a short period of time.

Thank you for your understanding.