Feature

●Product Size (W x D x H): 2.4 x 3.5 x 9.8 inches (6.2 x 9 x 25 cm)
●Weight: 2.2 oz (65 g)
●Country of Origin: Peoples Republic of China


Description

Product Description

Water supply bottle for rabbits, with activated carbon filter, and a bottle that allows you to drink water with purified carbon filter. The nozzle is a narrow mouth. The ball is small and light with power. The nozzle can be disinfected with boiling water. Can be attached to cages up to 0.2 inch (4 mm) thick wires, 1.0 inch (2.5 cm) between wires.

Indications

! Protect your warnings, uses, and subjects. Use clean water that is suitable for drinking standard tap water. Please keep out of reach of children. Do not use near open flames, near stairs or objects that may fall over. Do not use anything other than the dedicated bottle. Do not use for long periods of time when you leave home. Use in places where it is easy to clean even if it gets wet. In order to prevent fragments and parts from accidentally ingesting, please observe the following: Do periodic inspection (before use, during use) for whether there is no looseness or damage; Do not chew your pet. If you accidentally swallow the ball at the tip, please consult a veterinarian immediately. Wash the bottle thoroughly and replace it every day without leaving water

Important Message

Indications

! Protect your warnings, uses, and subjects. Use clean water that is suitable for drinking standard tap water. Please keep out of reach of children. Do not use near open flames, near stairs or objects that may fall over. Do not use anything other than the dedicated bottle. Do not use for long periods of time when you leave home. Use in places where it is easy to clean even if it gets wet. In order to prevent fragments and parts from accidentally ingesting, please observe the following: Do periodic inspection (before use, during use) for whether there is no looseness or damage; Do not chew your pet. If you accidentally swallow the ball at the tip, please consult a veterinarian immediately. Wash the bottle thoroughly and replace it every day without leaving water

Ingredients

Body: PET, polypropylene, polycarbonate, stainless steel, rubber/filter: polypropylene, filter material: activated carbon, urethane, non-woven fabric

Directions

Please read the instruction manual on the back of the product mount before use. (Compatible Cages and Circles: Wire thickness up to 0.2 inch (4 mm) / Width and Length of the wire: 1.0 inch (2.5 cm)); How to Use: (1) Secure the holder to a cage or circle. Holds the holder securely on the wire mesh. (2) Fill the bottle with water and insert the filter, then install the nozzle. Please wash the bottle and filter thoroughly before using. Fill with clean tap water for up to 8 minutes. The black grains of activated carbon (filter) will be released at the beginning, but in the case of the rabbit, it will not be an issue. (3) Deflate the nozzle tip. Turn the bottle up/down and lightly press the ball at the tip of the nozzle several times. Potoes and water may appear, but if you shake the ball up and down a few times to make it fit immediately. Make sure that no water will leak and leak proof. (4) Snap the bottle to the holder. Adjust the height to make it easy to drink. Use your fingers to roll the ball at the tip of the nozzle to teach you to drink water! Attach the rabbit eyes to the height

Legal Disclaimer: PLEASE READ

We cannot accept returns for damage caused by pet bites. Product specifications may change without prior notice