Feature
●Port diameter: 1/4 flare x 1/4 flare
●Total length: 3.9 inches (100 mm)
Description
Removing the valve core eliminates resistance and allows for faster front retrieval
Gas recoil pressure absorbing sleeve allows for easy removal of valve core without any resistance.
The valve core seals will get caught due to a bad seal and allows gas to be retrieved through the side flare port without the valve core escape.
R22
From the Manufacturer
Bubble Core Remover & Exchanger
Removing the valve core eliminates resistance and allows for faster front retrieval
Gas recoil pressure absorbing sleeve allows for easy removal of valve core without resistance.
A bad valve core gasket allows gas to be retrieved through the side flare port even if the valve core does not fall out successfully.
- Port diameter: 1/4 flare x 1/4 flare
- Total Length: 3.9 inches (100 mm) / Maximum 6.3 inches (162 mm) (when shaft extended)
How to use
|
|
|
|
|---|---|---|
1Grab the valve core at the tip of the shaft and turn the handle to remove the valve core. |
2Close the open and close the valve to replace the valve core or retrieve work. |
3Remove the knurling and connect the charge hose to recover the gas |
|
|
|
|
|---|---|---|---|
| Bubble Core Remover & Exchanger TA230GA | Bubble Core Remover & Exchanger TA230GB | Bubble Core Remover & Exchanger TA230GC | |
| Model No. | TA230GA | TA230GB | TA230GC |
| Port Dia. | 5/16 flare x 5/16 flares | 1/4 flare x 1/4 flares | 1/4 flare x 1/4 flares |
| Total Length | 3.9 inches (100 mm) / Maximum 6.3 inches (162 mm) (when shaft extended) | 3.9 inches (100 mm) / Maximum 6.3 inches (162 mm) (when shaft extended) | 3.9 inches (100 mm) / Maximum 6.3 inches (162 mm) (when shaft extended) |
| Application | For R410A/R32 | For R12/R22 | For R407C/R404A/R507A/R134a |