Feature(may vary by option.)

●(Large Capacity/Constant Temperature Box) The dryer box has a wide interior space, and can store 2 filament rolls less than 2.8 inches (70 mm) in width or 1 filament roll under 5.9 inches (150 mm). Suitable for multi-shape filaments including 1.75mm/2.85mm/3.00mm Please open the PTFE seal on the top of the box while heating to prevent moisture evaporation
●(Removal of excess water) Filaments for 3D printers are hygroscopic and moisture may cause printing defects. Removes excess moisture and keeps filament dry for better printing. The surface of the print is smoother and the adhesive of the layer. No more fragile PLA, PETG or ABS filaments
●Displays internal temperature and humidity: Displays the humidity and temperature inside the dry box in real time. Setting temperature 40℃, 45℃, 50℃, setting time 6-12 hours If you use the dry box in a room temperature below 16 degrees Celsius, the temperature inside the dryer box will not increase up to 50 degrees Celsius. However, please rest assured that the drying effect does not decrease in your life
●【Superior Power Off Drying Mode】Silicone & PTFE seal allows filament to be stored for a long time without a power source, protecting the filament from moisture and dirt. You can put 4 bags of desiccant (not included in the package) inside the dryer box to improve the drying efficiency and quality
●(Heats more evenly) The filament dryer has a built-in fan that allows air to circulate inside the filament dryer box. Built-in fan provides 360° circulation heating which heats the filament more evenly. Heats the filament more evenly and makes drying more efficient

[Black]

Description