Feature(may vary by option.)

●Product Size: Width 6.3 x Depth 5.7 x Height 12.8 inches (16 x 14.5 x
●Weight: 7.1 lbs (3.9 kg)
●Maximum discharge amount: 39.4 gal/min (90/105 L/min) (when using an inner diameter 1.3 in (32 mm) hose)
●Total Lifting Height: 16.9 ft (4.5 m) / 13.9 ft (6 m) (when using an inner diameter 1.3 inches (32
●Minimum Water Level: 2.0 inches (50 mm)

[For clean water]




[For sewage]





Description

For discharge and drainage treatment of civil engineering, construction sites, etc.
For water and drainage for agriculture.
For emergency drainage.
Power plug with ground wire (round terminal).
Power supply: AC 100 V 50/60 Hz.
●Current value: 2.6/2.4A
●Power consumption: 190/240W
Motor protection device: thermal protector.
Power cord: VCT 0.03 in x Approx. 12.8 ft (0.75 mm x 3.5 m)
Accessories: 1 x 1.3 inch (32 mm) barb nipple 1.0 inch (25 mm) barb nipple 1.0 inch (25 mm) joints, 2 x joint gaskets, 1 x hose band 1.3 inch (19 to 38 mm), 1 x hose band 1.0 inches (25 mm)



From the Manufacturer



Nakatomi SPS-100T Submersible Pump for SewageNakatomi SPS-100T Submersible Pump for Sewage
Nakatomi SPS-100T Submersible Pump for SewageNakatomi SPS-100T Submersible Pump for Sewage

Submersible pump for household power supplies.

Not suitable for water with large solids, but can handle some sand or mud.It can also be used to discharge water from the bottom of the holes that have been punched during construction.

It can be used in a variety of places such as disaster drainage work in factories and sites, as well as for stable supply of agricultural water and to prevent farming damage.

VersatileVersatile

Easy to use handleEasy to use handle

Minimum water level is approximately 2.0 inches (50 mm)Minimum water level is approximately 2.0 inches (50 mm)

Versatile

This submersible pump for sewage in civil engineering, construction sites, emergency discharge processing, and agricultural supply and drainage.

Easy to use handle

The handle makes it easy to tie ropes and is easy to carry.

Minimum water level is approximately 2.0 inches (50 mm)

If there is a risk of inhaling solids too much, please place it in a basket, etc., so as not to inhale.

Nakatomi SPS-100T Submersible Pump for SewageNakatomi SPS-100T Submersible Pump for Sewage

EWP-10DEWP-10D
NAKATOMI

Nakatomi brand was established in 1995.

We develop products that support a wide range of work spaces, from commercial to home use.

Nakatomi concept is to focus on ease of use and quality.

We have thorough product research, customer windows and sales centers nationwide to satisfy our customers.

From research and development, production and after-sales service, we will deliver satisfaction with a consistent Nakatomi network.

Nakatomi SPS-100T Submersible Pump for Sewage

Submersible pump for sewage in civil engineering, construction sites, emergency discharge processing, and agricultural supply and drainage for sewage, etc.

Not suitable for water with large solids, but can handle some sand or mud.It can also be used to discharge water from the bottom of the holes that have been punched during construction.It can be used in a variety of places such as disaster drainage work in factories and sites, as well as for stable supply of agricultural water and to prevent farming damage.

  • Product Size: Width 6.3 x Depth 5.7 x Height 12.8 inches (16 x 14.5 x
  • Weight: 7.1 lbs (3.9 kg).
  • Maximum discharge amount: 39.4 gal/min (90/105 L/min) (when using an inner diameter 1.3 in (32 mm) hose).
  • Total Lifting Height: 16.9 ft (4.5 m) / 13.9 ft (6 m) (when using an inner diameter 1.3 inches (32
  • Minimum Water Level: 2.0 inches (50 mm)
  • Maximum water temperature: 12 - 104°F (5 - 40°C)
  • Continuous usage time: 8 hours

Looking for specific info?

Product description

For discharge and drainage treatment of civil engineering, construction sites, etc.
For water and drainage for agriculture.
For emergency drainage.
Power plug with ground wire (round terminal).
Power supply: AC 100 V 50/60 Hz.
●Current value: 2.6/2.4A
●Power consumption: 190/240W
Motor protection device: thermal protector.
Power cord: VCT 0.03 in x Approx. 12.8 ft (0.75 mm x 3.5 m)
Accessories: 1 x 1.3 inch (32 mm) barb nipple 1.0 inch (25 mm) barb nipple 1.0 inch (25 mm) joints, 2 x joint gaskets, 1 x hose band 1.3 inch (19 to 38 mm), 1 x hose band 1.0 inches (25 mm)