Product name: Cleaning agent for removing mold on rubber gaskets, caulking, and tile grout. - Cannot be used on: Metals, items that absorb water, sand walls, dirt walls, walls with fabric coverings, fiber walls, decorative steel plate walls (magnetic type) in unit bathrooms, deteriorated PVC walls, wooden items, items with fur, as well as metal products such as enamel, aluminum, and brass because this would cause rust. Usage instructions and recommended amount: Apply a 0.2-inch (5 mm) thick layer to rubber gasket or tile grout. 1. Remove the pointed cap and take off the inner lid.Do not point and spray at your face. 2. Apply a 0.2-inch (5 mm) thick layer to mold stains.When using on places above eye level, such as walls or ceilings, apply with a brush (nylon). 3. After 15 minutes, rinse off the area with water or wipe it down with a wet cloth.For severe mold, leave it for about 10 hours. 4. After use, replace the inner lid on and store it in a cool, dark place.Always wash your hands, face, and eyes after finishing your work. Cautions for use: Be careful not to get any liquid into your eyes. Please do not mix this product with other chemicals.If mixed with acidic products, vinegar, alcohol, or ammonia, it will produce harmful gases. Do not use for anything other than the intended purpose. Foreign made tiles and unit bathrooms may become discolored, so be sure to test on an inconspicuous area before using this product. If any residue is left in the bathtub, it may cause discoloration so rinse it with water immediately. Please be careful as getting it on clothes or carpets will cause discoloration. Do not transfer to another container for use. In order to avoid damage, do not drop this product. Do not grip the container strongly when opening the cap.The contents may burst out. Caution: If used or mixed with acidic products, harmful chlorine gases may be released. Please use in a well ventilated area. If the liquid gets in your eyes, immediately rinse them with water. Make sure that this product stays out of the reach of children. Do not use this product if you are unhealthy, have a heart condition, have a respiratory disease, and so on. Always use with ventilation.If you have a ventilation fan, it is more effective to open at least two places such as windows or doors. Wear rubber gloves, a mask, protective glasses, goggles, and so on. Do not use in large quantities or for a prolonged period of time. Do not use it while bathing. (First Aid) When it gets into your eyes: Immediately rinse with running water for 15 minutes or more.Be sure to consult an ophthalmologist immediately afterwards.If you leave it as is, there is a risk of going blind. When swallowed: Do not induce vomiting. Immediately rinse your mouth out and drink 1-2 cups of water or milk. Then consult a physician. When it gets on your skin: Immediately rinse with running water until it no longer feels slimy.If there are any abnormalities, consult a dermatologist. If your eyes burn, if you start coughing, or if you feel sick while using this product, stop using it immediately. Leave the area, rinse your eyes, and try gargling. For any of these cases, please bring the product with you when you consult a doctor. Ingredients: Hypochlorite, sodium hydroxide (1.0%), thickener, surfactant, sodium carbonate, and stabilizer. Liquidity: Alkaline.
次亜塩素酸塩、水酸化ナトリウム(1.0%)、増粘剤、界面活性剤、炭酸ナトリウム、 安定化剤。