Can be used for all types of mold, mildew, mildew, etc.Because it can remove even mold bacteria and chlorine resistant bacteria, you can expect it to mold and mildew in your bathroom for about 1-3 months.The danger and chlorine odor during work is as strong as the mold remover on the market. Product Name: Mildew remover cleaning agent for wood, tatami mat and cloth.Mildew inhibitor in bathrooms and rooms Beone Corporation Inquiry: 044-978-1071 Applications (Mold Soft Remover Spray 15.7 fl oz (450 ml) for wood, tatami goug, white lace curtains to remove mildew (15.7 fl oz (450 ml) in bathrooms and interiors. Cannot be used with mildew soft removal sprays; fiber walls, upholstered walls, metals (which cause rusting), fabric products of colored patterned items, paper, leather products; Can not be used with anti-mold spray; items that may seep through electronics, water, painted surfaces, solid wood, tableware, etc. How to use: Estimated amount of use: Spray about 15 times per square meter *Please test the patch on an inconspicuous area. (1) Turn the nozzle tip to match the "ON" mark *Do not operate it toward the face. (2) Spray directly from the mold and mildew stains about 5.9 inches (15 cm).Do not spray above the eye.If you use it in high places such as walls and ceilings, apply it with a brush (nylon). (3) After 15 minutes, rinse with water or wipe with water well.If areas that cannot be wiped with a damp cloth, please dry it as is, but if you spray it more than 15 sprays per square meter, you will need to rinse it off and wipe it with water. (4) After use, turn the nozzle tip and set the "OFF" to the mark, and store it in a cool, dark place.After working, always wash your hands and wash your face and eyes. First Aid ● When it gets into your eyes: Rinse with water immediately running water for more than 15 minutes.Be sure to consult an ophthalmologist immediately later.Leave it as it is, there is a risk of blindness. When swallowed: Do not induce vomiting, rinse your mouth immediately and consult a physician. When it gets on your skin: Rinse with running water until it disappears as soon as it becomes slim.If there is any abnormalities, consult a dermatologist. When using it, if your eyes get soaked or uncomfortable, stop using it and leave it away and wash your eyes, or leave it out. In either case, please bring the product to you when you receive it. Mold soft removal spray ingredients: hypochlorite, sodium hydroxide (1.0%), non-ionic surfactant (polyoxyethylene alkyl ether), stabilizing agent. Liquidity: Alkaline; Mold prevention spray ingredient 2-phenoxy ethanol, Class 4 salt, holding agent, ethanol, IPA, ionic water