Feature(may vary by option.)
●Wide Compatibility: The wire stripper supports a wide variety of wires and has 10 amazing blades that allow you to add cables with a wide range of diameters from 0.04 to 1.5 inches (1.0 to 38 mm)
●Efficient Electric 10 Holes: This cable stripper uses a 1400/1680R/MIN and 370W high efficiency motor, which greatly increases the efficiency of wiring processing. Eliminates stress from working with a tapered line opener for efficiency and comfort
●【Multi-Purpose】: Ideal for electric wire peeling machines and industrial applications. For coated cables and wires, this type is easy to remove. Ideal for recycling copper wires or removing plastic and rubber insulators from discarded wires
●Durable alloy steel blade: The cable peeling machine makes it easy to apply VA Kevl or steel cables. In addition, the blade and roller rotate with the gear to prevent the cable from slipping and ensures stable work
●Note: When the wire stripping machine gets stuck or stuck, press the stop button immediately and stop the machine. If the wire gets tangled, please remove it
[rs-ds-38m]
[rs-ds48m with handle]
[Replacement blade]
Description
How to operate
1. Insert one cable at a time.Before inserting the cable, cut the tip to avoid any gap.
If the Kepur has too much oil, please wipe it off.No hot cables come off
2. Put ke-pull in the appropriate hole according to the thickness and shape of ke-pull.Turn the upper left and right bolts to lower the blade to the extent that they digged into the ke-pull cover.
Turn the left and right bolts evenly and make sure the blade is parallel.
3. Press the stat button (green) button to automatically send the keypl and cut the cover.
The large red round button is an emergency stop button.
4. Press the red stop button to stop it.
If the wire gets stuck or it does not move, press the stop button immediately to stop the machine.If the wire or tangled up, please remove it.
5.Cleaning and maintenance
In order to get the job done, it is recommended to clean the equipment regularly with a rag.If there are stubborn stains, use a damp cloth.Do not use solvents such as gasoline, alcohol, ammonia.
Feed Hole Introduction:
Make sure the wire diameter is the same as the feed hole.Large feed hole with large lines, small line in small feed hole, flat line in flat feed hole.
A: Flat Ke-Pull/Weaser - Supply Hole B: Diameter 0.04 - 0.1 inch (1 - 2.5 mm) ke-pull/wire supply hole C: Diameter 0.2 - 0.3 inch (6.0 - 8.0 mm) ke-pull/wire supply hole
D: 0.4 inch (10 mm) diameter ke-pul/yer feeding hole F: 0.4 - 0.6 inch (10 - 15 mm) diameter ke-pull/wire feeding hole F: 0.6 - 0.8 inch (15 - 20 mm) diameter ke-pull/wire supply hole
G: 0.8 - 1.0 inch (20 - 25 mm) diameter ke-pul/ya feeding hole H: Diameter 1.0 - 1.2 inch (25 - 30 mm) ke-pull/yah supply hole I: Diameter 1.2 - 1.5 inch (30 - 38 mm)
Note: Do not put your hand into the machine in any situation.
Precautions
The mechanical reducer has a small amount of oil on it,
If oil leaks during transportation, please wipe clean.
Does not affect use. Please lubricate the reducer once 1 to 2 years.
Please do not plug anything other than 1-38mm wire in diameter.
After working for a long time, leave the device still for about 20 minutes to cool it.
Store equipment out of reach of children.