Product Description

Features:
No primer treatment is required, and it bonds strongly to many materials.
It is resilient and can also be used for movement in the construction area.
Can be applied to wet surfaces. Suitable for water applications.
Will not crack or become brittle over time.
It is 19 times more transparent than conventional silicone sealants (lexel clear type), and can be painted with water-based and oil-based.
Unlike silicone, it bonds to the old Lexel itself, so it is easy to repair.
The mold and mildew build is less mold.
Lexel Clear is very transparent, so it is difficult to see out the edges and can be installed cleanly without using masking tape.
[Use]
Bathrooms, Tiles, Washbasins, Windows, Around Doors, Around Shutter Frame
Siding, exterior walls, siding, eave, roof, gutters, roof, rooftop stop, sheet metal, ALC sheet
Vents, ducts, refrigerant pipe throughout, drains, rain panels, cables, skylights, etc.
[Precautions]
Lexel deteriorates polystyrene insulation.
Please avoid using in high heat areas such as stoves, aquariums, pools, and rubber roofs.
This product contains toluene and petroleum distillates, so please keep away from heat and flames.
Please ensure sufficient ventilation during use.
When it gets on your skin, please wipe it with a cloth and wash it thoroughly with soap.
Consult your physician immediately if itching or inflammation occurs.
If you inhaled the steam and get bad mood, please rest in the fresh air area and consult a doctor if necessary.
If swallowed, please wash your mouth thoroughly with water, drink a large amount of water or milk to dispense and immediately consult a doctor.
In the event that it gets in your eyes, wash your eyes for at least 15 minutes with a large amount of water and immediately consult a doctor.
Keep out of reach of children.

Legal Disclaimer

When storing after opening, please seal the nozzle with a food wrap and place the cap from the top

From the Manufacturer

Lexel Clear (5.0 oz 148ml)

Technical Data

Based on in-house tests at Sashko, the representative values are listed.

• Tuck Free: Less than 30 minutes
• Curing Time: 2 - 4 days.
• Full cure time: 1 - 2 weeks
• Time to paint after installation: Water-based paint after 24-48 hours
• Elongation to Cut: 900%
• Application surface temperature: -57°F to 108°F (-17°C to 48°C).
• Temperature to maintain performance after cure: -34°C to 93°C
• Standard installation amount: 0.2 inch (5 mm) x 0.2 inch (5 m) in gap

Precautions

Lexel deteriorates polystyrene insulation. Please avoid using in high heat areas such as stoves, aquariums, pools, and rubber roofs.

Features

Bonds to many materials without priming required.It is resilient and can be used to move around the construction area.Can be applied to wet surfaces and is suitable for use around water.Will not crack or become brittle over time.Clear, water-based and oil-based paint availableIt bonds to the old Lexel itself, so it is easy to repair.Mildew resistant formula reduces mold and mildew buildup.

Application

Bathrooms, tiles, washbasins, windows, around the door, around the shutter frame, siding, exterior walls, siding, siding, siding, eave, rooftop, gutters, rooftop stops, sheet metal, ALC plates, air vents, ducts, refrigerant pipe throughout, drains, rain panels, cables, skylights, etc.

Can be applied to wet areas

Leak	Submersible and start setting It will adhere to wet surfaces, but it will be more sticky on a dry surface.	Leak stop after installation. This continuous photograph is an example of tested underwater to prove it is water resistant.Lexel bonds underwater but does not harden.Please note that it cannot be used in water.

Features

Excellent Elongation It has an elongation power so it is very easy to follow.900% stretch to cut	Paintable (water-based, oil-based) Oil paint can be applied after confirming the curing, but it is recommended that it be applied after 30 days of installation.Applying within 30 days may leave the paint residue behind for 2 weeks or more, depending on conditions.	Clarity Lexel Clear is 19 times the clarity of a silicone sealant.	Anti-mildew formula Installation examples in bathrooms

Adhesive Material

Wood: cedar, pine, cherry blossom, oak, teak, mahogany, fir, ebony, birch, OSB, marquet, etc. Metal: Aluminum, Stainless Steel, Copper, Brass, Silver, Nickel, Lead, Iron Steel, Galvanized Steel, Cold Rolled Steel, etc. Plastic: ABS resin, acrylic board, fiberglass, polycarbonate, PVC, urethane, vinyl, plexiglass etc. Other Surfaces: Asphalt, Brick, Cement, Glossy Ceramic Tile, Cloth, Canvas, DuPontTM, Corian(R), Concrete, Formica, Glass, Leather, Marble, Mortar, Ceramic, Polyurethane (After Hardening), Stucco, Terracotta, Thinset Mortar, Polyisobutylene, Paint Surfaces etc. Materials not suitable for adhesion: artificial marble, polypropeller, polystyrene, polyethylene, rubber, Teflon, vulcanized rubber, silicone, wax, wax, EPDM synthetic rubber, siliconer, hydrochloric acid, fluoride acid, sulfuric acid, peroxide, organic solvents etc.

Usage examples